The NEW Build Your Own Arcade Controls

Arcade Collecting => Pinball => Topic started by: SirPeale on March 13, 2010, 09:36:55 am

Title: Roy Clark Pin - Repair Sites?
Post by: SirPeale on March 13, 2010, 09:36:55 am

Client has contacted me regarding his Allied Leisure pin Roy Clark the Entertainer.  Having never worked on one I wanted to arm myself with info.

The info online is amazingly SPARSE.  Nothing @ Marvin's site.  Did find this @ Flippers: http://www.flippers.com/ALI-Pinball_service.html (http://www.flippers.com/ALI-Pinball_service.html) which is a nice start.  Any other little treasure troves I'm not aware of?

Title: Re: Roy Clark Pin - Repair Sites?
Post by: lilshawn on March 13, 2010, 04:50:37 pm

unless it seems like an obvious fix, i wouldn't attempt it on site.

chances are there will be less than or equal to ZERO support out there.
http://www.ipdb.org/search.pl?any=Allied+Leisure+Industries&search=Search+Database&searchtype=quick#1252 (http://www.ipdb.org/search.pl?any=Allied+Leisure+Industries&search=Search+Database&searchtype=quick#1252)


PS: the "Hoe down" and "Roy Clark" are identical 'cept for the backglass with Roy Clark on it

Title: Re: Roy Clark Pin - Repair Sites?
Post by: SirPeale on March 13, 2010, 06:32:34 pm

Quote from: lilshawn on March 13, 2010, 04:50:37 pm

unless it seems like an obvious fix, i wouldn't attempt it on site.

That's what I was thinking.  It seems that most of the issues with these (from the site referenced above) are power supply issues.  There isn't any high voltage, so that's a plus. 

Title: Re: Roy Clark Pin - Repair Sites?
Post by: Ken Layton on November 21, 2016, 02:10:49 am

Updating this old thread.

Repair info is posted here:

http://www.pinwiki.com/wiki/index.php?title=ALI/Fascination_Repair (http://www.pinwiki.com/wiki/index.php?title=ALI/Fascination_Repair)