The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: agalardi on October 22, 2019, 01:34:01 pm
-
I have a 21" arcade monitor and I am far away from a good calibration. I tried a lot but I am not good at it.
It would be great if someone have a step by step calibration guide/procedure/instructions.
I would be perfect if it comes with some calibration images with some kind of scale. Something like: "step 4: open img4 and adjust red until you can see between X and Y"... and so on.
Maybe It is not possible to get a guide like this... :dunno
-
Color balancing is always going to be subjective. The key is to get your black and white levels the way you like then go from there. On Youtube, buffet has a decent video on how to color balance a Sanyo. The process is very similar to all monitors (except Sanyo has 3 brightness controls) so you might want to take a look at that. Start watching after he is done setting the B+. Here's a link to it https://youtu.be/HASKqAOwLms?t=790 There are other videos out there try searching for "how to color balance arcade monitor"
-
Thank you behrmr, I will try