The NEW Build Your Own Arcade Controls
Main => Audio/Jukebox/MP3 Forum => Topic started by: hbkid63 on August 08, 2020, 02:04:29 pm
-
I am new to this forum and having owned a bar for many years I have accumulated 6 of these ( in various stages of disrepair)... don't ask why...plus boxes of parts. At this point after the advent of digital jukeboxes and the selling of my bar I'm slowly disposing them , heres my problem .. Im gifting one to my son in law but having plugged it in nothing happened, I removed the remote on/off cancel components and installed a different power supply, it came back to life … computer, cd player loads everything seems to work except sound.. I have tried everything.. 2 obvious problems . I cannot find a black wire that goes to E1 on the terminal block ( not in harness) the second problem is even stranger to me John8 ( logged on Nov 21 2019) and previous posts show speaker wiring coming from the crossover board (J1) to be
1=pink 1=pink
2=blank 2=blank
3=blank 3=green
4=green on two of my cd100a's 4=black
5=black 5=black
6=slate 6=slate
7=blank 7=blank
8=violet 8=violet
both crossover boards are 61052701
Can anyone help thanks
-
Not an expert by any means, and I realize this is an old thread, but I was looking at my own CD100D and I have the same J1 configuration you describe on my crossover board. Same part number 61052701, 2 and 7 are blank, 4 and 5 are black, and green is in 3.