The NEW Build Your Own Arcade Controls
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: polaris on September 14, 2008, 02:41:35 pm
-
When you guys restore , i get the idea the paint you get mixed has codes/(recipes)
i was thinking it may be worth having a wiki page of the codes for different restores for people to use.
i posted this here rather than in the wiki as you guys hold the info.
what do you think
link to wiki (http://wiki.arcadecontrols.com/wiki/Paint_color_codes)
-
Great idea!
I will go first, Since all i had to do was copy and paste it from another thread.
I used these paint codes for my PAC-MAN.
I had them color matched from my machine.
This Paint was LOWES American Tradition/Interior Semi Gloss Latex
YELLOW
BASE: B 4-40240
COLOR AMOUNT
103 .5
104 1.5
113 20.5
114 11Y25.5
RED
BASE : B 4-44975
COLOR AMOUNT
109 1.5
113 6
114 42.5
116 1Y45
BLUE
BASE : B 4-44975
COLOR AMOUNT
101 2.5
102 45.5
103 17
113 1Y29.5
-
do you have thread that i can link to , i can link to your post for the info ( i think ) but the original thread showing its use would be cool to include :cheers:
-
Yes, Here it is.
http://forum.arcadecontrols.com/index.php?topic=84074.0
-
This sort of info is very well suited to the Wiki.
-
ChadTower reported here (http://forum.arcadecontrols.com/index.php?topic=84342.msg883085#msg883085) the colors for Defender as a near perfect match:
Krylon Red Pepper
Krylon Sun Yellow
Gloss black
-
Anyone have the exact code for DK baby blue?
-
Anyone have the exact code for DK baby blue?
Neilboys dk restore has codes for paint he got made up
here (http://forum.arcadecontrols.com/index.php?topic=70324.msg721920#msg721920)
-
I get PM'd alot about the color RED of my DONKEY KONG
My Color is in this thread.
http://forum.arcadecontrols.com/index.php?topic=79183.0
-
I get PM'd alot about the color RED of my DONKEY KONG
My Color is in this thread.
http://forum.arcadecontrols.com/index.php?topic=79183.0
do you have the code for the red , couldn't see it in the thread :cheers:
-
My DONKEY KONG / Red
1009-3 RADIANT RED / Lowes Valspar Ultra Prem. Semi Gloss/Interior Latex (1) Gallon
114-24
113-28
105-32
115-2Y24
-
My DONKEY KONG / Red
1009-3 RADIANT RED / Lowes Valspar Ultra Prem. Semi Gloss/Interior Latex (1) Gallon
114-24
113-28
105-32
115-2Y24
added :cheers:
-
Super Pac Man blue paint code:
-
Super Pac Man blue paint code:
cool, do you have a thread on the machine it was used on by any chance, or maybe just post a pic of it and i'll link to that
:cheers:
-
Prok's got a bunch on his site
http://www.oleszakcreative.com/paint.asp
-
Prok's got a bunch on his site
http://www.oleszakcreative.com/paint.asp
I have adjusted the link in the restoration section of the wiki (http://wiki.arcadecontrols.com/wiki/Restoration#Cabinet_Restoration) to point to the new page (now to see if pr0k puts all of his old pages back up).
-
i think ill limit the page I'm making to just projects on the board so that people cab see the color and its use, and as the other info is there in the restoration wiki. i think its worth me linking to the page I'm doing from the restorations index too
-
i think ill limit the page I'm making to just projects on the board so that people cab see the color and its use, and as the other info is there in the restoration wiki. i think its worth me linking to the page I'm doing from the restorations index too
You might want to mirror the info in other pages ... I hadn't noticed that pr0k has been redesigning his site and we've lost a number of links from the wiki as a result.
-
when you say mirror? do you mean include links updated links?
-
when you say mirror? do you mean include links updated links?
Nah ... just copy the stuff from the other pages.
-
when you say mirror? do you mean include links updated links?
Nah ... just copy the stuff from the other pages.
is it cool to do that? i'm never sure with interweb ettykett
-
I think if you include a citation and link to the original that would be fine, but the laws may be different here in Zakkistan.
-
I am curious on the blue color used on Track and Field Cabs as I recently found a converted one that has been painted mostly black and the blue that was left around the monitor area seems to look darker than the Track and Field cabs I have seen online.
-
if you look at the link above posted by gatordad to proks site it has a code entry for track n field. apart from that i cant help sorry. if you do a restore be sure to come back and post in here with colors and results please :cheers:
-
if you look at the link above posted by gatordad to proks site it has a code entry for track n field. apart from that i cant help sorry. if you do a restore be sure to come back and post in here with colors and results please :cheers:
Thanks, it figures the one time I don't click thru to do my research I miss my answer ;D. And I will definitely share my results with the community when I get around to starting.
-
Anyone have the centipede paint code for the off white side panel background? I'd like to touch mine up in a number of spots.
-
Wasn't Centipede vinyl?
-
I'm talking about the background color, not the picture.
-
I just painted my DK powder blue using some high quality Sherwin-Williams paint. It came out pretty good. The recipe is in the pic. Sorry about the crappy shots of the cab. I was painting outside this morning and the sun was shining through and casting some weird shadows. The color looks great though even though I still want to add one more coat.
-
Prok's got a bunch on his site
http://www.oleszakcreative.com/paint.asp
I have adjusted the link in the restoration section of the wiki (http://wiki.arcadecontrols.com/wiki/Restoration#Cabinet_Restoration) to point to the new page (now to see if pr0k puts all of his old pages back up).
Forgot to mention that I updated the wiki a while back when pr0k put up his new paint codes page:
http://www.gamestencils.com/index.php?sc_page=41
-
I figure having many options is always a good thing. I'll throw my Donkey Kong Blue coat in the ring as well:
Colorant OZ 48 96 192 384
B Lamp Blac - 6 - - -
C Yellow Ox - 16 - - -
E P Thalo B 5 8 - - -
DEP 41-316
Interior/latex/semi-g
Thats for a gallon of Pittsburgh Paints Ultra Interior Latex.
(http://img.photobucket.com/albums/v379/tarzanthellama/DSCF4602.jpg)
-
Real nice. Off topic - how did you get straight lines along the interior edges in the front? I am using blue painter's tape but I get seepage underneath or the paint starts lifting when I peel off the tape. It's not going to be too bad once I go back and touch up with a very small artist's brush but it is annoying...
:angry:
-
Real nice. Off topic - how did you get straight lines along the interior edges in the front? I am using blue painter's tape but I get seepage underneath or the paint starts lifting when I peel off the tape. It's not going to be too bad once I go back and touch up with a very small artist's brush but it is annoying...
:angry:
Hmm. Perhaps the paint your putting the tape on isn't quite dry yet? I also used blue painters tape, but when doing the front I had total disregard for the black on the inside of the side protrusions. Once the blue on the front was dry and had set for a few hours, I put plastic sheeting over the front that was held on by blue painters tape around the joint of the sides and front piece. The tape only touched about a quarter inch of the "fresh" blue paint all around. Then I did the same to protect the sides when I spray painted the black back onto the cab.
IDK if that made any sense... pm me if you need further clarification.
EDIT: Maybe this can help. This is what I was trying to describe. I may be way off on what you're even asking for tho...
(http://img.photobucket.com/albums/v379/tarzanthellama/DSCF4597.jpg)
-
any new projects and paint codes bump
:burgerking:
-
over 120 days old bump, any new projects out there.
:burgerking:
i need to pull my finger out and update the wiki with what's here but i've been away so sue me!
:cheers:
-
I think it actually would be helpful to describe exactly how paint codes work or are read. This may be elementary to some, but seeing something like
Colorant OZ 48 96 192 384
B Lamp Blac - 6 - - -
C Yellow Ox - 16 - - -
E P Thalo B 5 8 - - -
is a little confusing at first. (ok, i'll admit, i'm a little confused myself ;) )
To be honest, i read the ms. pac paint codes on appolo and see "Pink - Glidden Passion Flower 30RR 26/335.", but have no idea what the 30RR 26/335 means either.
would you be willing to add the explanation to the top of the wiki page?
-
umm, i cant say i particularly understand the codes myself, i just started this thread as it seemed information worth rounding up for the wiki. i would just assume the guy in the paint shop would understand them.
if someone does have a better idea can they add it to the wiki please or post it here and me or cheffo will put it in there. :P
-
Good idea, but I think it needs a seperate USA/Europe table. RAL is very uniform, but it lacks good colours, and here Sikkens-numbering (ACC codes) is widely accepted.
About ACC in Dutch (de graphs are understandable by anyone I guess):
http://www.sikkens-specialist.com/NR/rdonlyres/59D2ED42-1D34-4D48-B832-8FC61353F59E/0/1094AcoatColorCodification_ACC_Systeem_14062007v009_.pdf (http://www.sikkens-specialist.com/NR/rdonlyres/59D2ED42-1D34-4D48-B832-8FC61353F59E/0/1094AcoatColorCodification_ACC_Systeem_14062007v009_.pdf)
-
I had a quart of paint mixed at walmart today, took a piece of the inside of my cabinet near the control panel latch to be color matched. It is perfect. Please see the photos, the first photo shows the piece of the cabinet, if you look in the top left, you might see where i put a dab of paint. The next photo shows the close up, with the paint in the center. The last photo is the label on the paint can. This is semi gloss, color place paint. I just got finished with painting the cab, i have it right next to another DK cabinet and the color is exactly the same.
(http://i209.photobucket.com/albums/bb128/redfivexw1/dkcolor.jpg)
(http://i209.photobucket.com/albums/bb128/redfivexw1/dkcloseup.jpg)
(http://i209.photobucket.com/albums/bb128/redfivexw1/dkpaintcode.jpg)
-
scr33n the scratch build master over at brunos dragons lair fans forum has been building a burgertime, thought id include the info here
this may only be of use in italia T262/0884 - C000 GLO SENAPE 7 SMALTO SINTETICO
http://www.dragonslairfans.com/smfor/index.php?topic=1308.90 (http://www.dragonslairfans.com/smfor/index.php?topic=1308.90)
-
Nintendo Red:
For what it's worth, I'll add the info for the paint that Darthnuno had mixed up for my Nintendo cab.
The brand is Dulux (an ICI brand) mixed colours, EXTERIOR PAINT. There's also a small extra label saying "ED base / Satin"
Custom printed sticker on top says:
Nom (=Name): SHELL RED 3742
LAQUE EXTERIEURE (=Exterior paint) Satin 0.5L EXTRA DEEP
The Dulux brand is very uncommon in The Netherlands but there is supposed to be a store In The Hague that sells it. Darthnuno bought it at his local DIY store in Belgium, don't know which one though.
(Gotta love that name Shell Red in the Nintendo context ;))
The color looks 100% the same, but I STILL have to apply it :S
With flash:
(http://gallery.me.com/andre.huijts/100139/DSCF1788/web.jpg?ver=12539113290002)
And without flash, the color looks perfect !
(http://gallery.me.com/andre.huijts/100139/DSCF1789/web.jpg?ver=12539113370002)
-
I used Ace Hardware's Deep Fire F13 (http://www.color-swatches.com/ace/colors-for-your-life/deep-fire-f13/swatch.html)
on the cab repair on my Neo-Geo.
(http://www.werdna.net/arcade/IMG_5598.JPG) (http://www.werdna.net/arcade/fullsize/IMG_5598.JPG) (http://www.werdna.net/arcade/IMG_5599.JPG) (http://www.werdna.net/arcade/fullsize/IMG_5599.JPG)
-
You guys should post this on the restoration forum instead.
Mario Bros orange is Home Depot Behr Pumpkin Orange. It has a little bit more red in the color than the original paint color, but it's pretty damn close.
-
I'm currently building a Fix-it-Felix Jr bartop. And I did a lot of research on the DK (Nintendo) color code. The norwegian dealers don't know anything about the american color systems, so after some hours of intensive googling I found this to be the closest color:
http://encycolorpedia.com/24add4 (http://encycolorpedia.com/24add4)
This piece of plywood shows the difference between S1050-B10G (top half), and S1040-B10G (bottom half). (http://www.379009.net/nintendo-bartop/pics/2013-11-18%2020.18.20.jpg).
And btw: this is how the cab looks like, it's still a work in progress (with some temporary artwork):
Ohh... and for those interested, here's the project files: http://www.379009.net/nintendo-bartop/ (http://www.379009.net/nintendo-bartop/)
(http://www.379009.net/nintendo-bartop/pics/2013-12-04%2021.33.21.jpg)
-
Useful info for my FIF build thanks! That really looks good!
-
Updated Super Pac-man Blue paint code (the old one no longer works with the newer Home Depot Machines - shown with X below). Color matched from back door. Perfect match when dried and cured!
This is for Latex paint.
Enjoy!
DeLuSioNaL29