The NEW Build Your Own Arcade Controls
Main => Retail vendors => Topic started by: riddledtv on October 10, 2017, 10:44:12 am
-
2-way switcher = 1 mainboard only ($80 shipped, USA 48 states)
4-way switcher = 1 mainboard, 1 remote board ($120 shipped)
6-way switcher = 1 mainboard, 2 remote boards ($160 shipped)
8-way switcher = 1 mainboard, 3 remote boards ($200 shipped)
Power and signal cables are included with each remote board purchase.
You can now purchase these via paypal directly from my website (http://www.riddledtv.com/arcade/jamma_switchers.html).
If you are outside of the USA, please contact me for a shipping quote.
---- Details ---
The goal of this product was to build upon the advantages of the cheap 6in1 Jamma Switcher, while addressing the disadvantages.
List of features:
- Only one game board powered at a time, power sourced from mainboard. (or each remote board could have it's own power supply if you prefer)
- No Jamma extension harnesses needed.
- 3 ft cables adequate for remote mounting.
- 2 Jamma boards supported per cable set.
- Quadrupled the +5V capacity on the relays to support 20Amps.
- Added -5V to be controlled by a relay.
- pins e,27 can be either grounded or signal by changing a jumper.
- No goofy remote. Switch games by pressing P1Start+P2Start simultaneously for 1.5seconds. Or remove the onboard jumper and connect to 1 or 2 buttons of your choice to switch games.
My website provides some additional documentation (http://www.riddledtv.com/arcade/jamma_switchers.html)
-
I bought one of these. Best purchase in this hobby in long time! Buy with confidence.
-
I will need something like this for a upcoming project I have in mind.
Are these one offs or do you sell these all the time?
Also do you ship to UK?
-
Firstly, Thanks yotsuya for the positive reference.
I've mostly been on KLOV prior to now. I thought I should reach out to other forums as well.
I sell a lot of these, and plan to continue as long as I can. I will ship to the UK, please email or message me your address for a shipping quote.
I'm a hobbyist that designs and assembles these myself. I started out building add-on 3/4player and MK condenser boards to accompany the Chinese 6in1 switcher. Then started modifying those switchers because there was a need. I finally got tired of modifying someone else's switchers and decided to design my own. I'm also continuing to design and add other circuit boards to my inventory as well.
-
Man I may have to replace mine if you've got the -5v rocking
-
Firstly, Thanks yotsuya for the positive reference.
I've mostly been on KLOV prior to now. I thought I should reach out to other forums as well.
I sell a lot of these, and plan to continue as long as I can. I will ship to the UK, please email or message me your address for a shipping quote.
I'm a hobbyist that designs and assembles these myself. I started out building add-on 3/4player and MK condenser boards to accompany the Chinese 6in1 switcher. Then started modifying those switchers because there was a need. I finally got tired of modifying someone else's switchers and decided to design my own. I'm also continuing to design and add other circuit boards to my inventory as well.
Thanks I will drop you a msg sometime down the line.
I have a Jamma converted Area 51 coming my way and would like tobe able to get a few other lightgun jamma games in there as well.