The NEW Build Your Own Arcade Controls
Main => Consoles => Topic started by: LTC on February 12, 2022, 11:36:43 pm
-
So I picked up an OG Xbox for $10 the other day. Never had an Xbox of any kind before. I looked around for modding options and the soft mod seemed like too much trouble. I used to mod Playstation 2's as a side hustle back in the day, so installing mod chip seemed like a no brainer. Got an Aladdin chip from Amazon and installed it tonight. This Xbox is v1.0 (removed the clock cap while I was at it). Xbox boots fine with the EvoX logo with a power button press. Holding the power button down does not boot the system. LED is flashing red/green and no video output. Kernel shown up as 1.6 in system info now. Google says I need to flash bios to the chip for my version of hardware (1.0). What's the best way to get that done?
Next, I have a couple of hard drives sitting around.What's the proper way to initialize a new HDD?
And, if I have everything else sorted, what are ways to put games on the HDD? Will windows see the drive and let me copy things over, or am I limited to FTP? Also, do I just copy the ISO files, or do they need to be extracted and put in to individual folder?
-
So the red/green flashing light turned out to be a faulty mod chip. I was able to format a new HDD with Hexen disc, but was still getting intermittent boot or problems, and eventually it stopped booting and would just do t uh e red/green light. Pulled the chip out and boots fine. Amazon is shipping a new chip....
-
Just TSOP flash it.
Soft mods are fairly advanced these days, too.
-
I get that, but I would need to buy Splinter Cell and a USB cable...
Amazon delivered a new chip so all good now. Still need to figure out the best way to put games on the HDD. So far I have been burning the ISOs to an RW disc and using DVD2HDD app to install the games
-
FTP them from a pc via cross over cable, bro.
-
Do I need to extract the ISOs before copying via ftp? I have plenty of cat6 and connectors to make a crossover cable or I can just use a switch to connect to a laptop.
-
Yeah, you need to extract them first.
XDVD Mulleter
https://archive.org/details/XDVDMulleterBeta10.2
(https://archive.org/details/XDVDMulleterBeta10.2)
-
I need to give this a shot.
The prospect of modding an Xbox was how I wound up with this arcade machine malady to begin with.
-
Yeah, you need to extract them first.
XDVD Mulleter
https://archive.org/details/XDVDMulleterBeta10.2
(https://archive.org/details/XDVDMulleterBeta10.2)
Thanks pbj
-
it's not often you even find an unmodded xbox these days. i picked up about 10 of them all around town a few years back for a project, and only 2 of them was not already modded in some way and only 1 of them had modkeys. all the rest where softmods...it's literally that easy.
a copy of 007 for 9.99 at the local retro store and a usb drive with the corrupted savefile and bob's your auntie.