The NEW Build Your Own Arcade Controls
Arcade Collecting => Restorations & repair => Topic started by: Ortizimo on June 22, 2022, 04:43:51 pm
-
Hi. should I use putty, glue or bondo to seal up an arcade button hole so I can move the button to another location. Thanks.
-
What kind of material is the panel? If it's wood you could use a hole saw bit the size of the button holes and cut out a piece from scrap glue in the hole. Then wood putty over it and sand it down. I've personally gotten by with just wood filler globbed in there then sanded flat.
-
Oh man. I read the thread title wrong.
My advice won't apply.
-
Oh man. I read the thread title wrong.
My advice won't apply.
Or will it? Ortiz didnt say how long it needed to be filled……