The NEW Build Your Own Arcade Controls

Main => Main Forum => Topic started by: SirPeale on November 04, 2009, 05:24:27 pm

Title: Who needs monitor cap kits?
Post by: SirPeale on November 04, 2009, 05:24:27 pm: After the success of my "who needs cam locks" ordeal, I find a need for capacitors. I'm sure other people need them too!

I'm going to order a mass amount of them shortly for the following monitors:

Sanyo EZ-20

WG K4600

WG K4900

WG K7000

Other lists of choices would be anything listed in the Mouser Cap Lists (http://forum.arcadecontrols.com/index.php?topic=94961.0) thread in the Monitor forum (http://forum.arcadecontrols.com/index.php/board,4.0.html).

The caps included in this package would be hi-temp 105 degree caps, not their 85 degree cousins.

The price of each kit will vary and I'll have final numbers soon.

By doing it this way I can pass on savings to you guys, not only for the kits themselves, but for shipping. I can put at least four or five bags into a flat rate box. If you only need one I can ship 1st Class.

Any questions? PM me.
Title: Re: Who needs monitor cap kits?
Post by: SirPeale on December 10, 2009, 02:48:09 pm: Right at this very moment I am in need of quite a few K4600 kits. I will be ordering in the next 24 hours. Anyone that wants one, the price will be $7.00 each.

I'd also be happy to sneak in any other kit with the order, price would be dependent on which kit you need.
Title: Re: Who needs monitor cap kits?
Post by: speedklz on December 10, 2009, 03:03:54 pm: Price on K7000 kit?
Title: Re: Who needs monitor cap kits?
Post by: SirPeale on December 10, 2009, 07:54:17 pm: Quote from: speedklz on December 10, 2009, 03:03:54 pm
Price on K7000 kit?

Thinking six bucks.
Title: Re: Who needs monitor cap kits?
Post by: SirPeale on December 11, 2009, 12:38:29 pm: Nobody? Not one person?
Title: Re: Who needs monitor cap kits?
Post by: speedklz on December 11, 2009, 06:32:46 pm: Im in for six bucks on the 7000 kit .. my monitor will not even out at the top kind of rools over on itself I am thinking this will fix it.
Title: Re: Who needs monitor cap kits?
Post by: SirPeale on December 11, 2009, 06:54:55 pm: Quote from: speedklz on December 11, 2009, 06:32:46 pm
Im in for six bucks on the 7000 kit .. my monitor will not even out at the top kind of rools over on itself I am thinking this will fix it.

Did you adjust the 50/60 Hz pot?
Title: Re: Who needs monitor cap kits?
Post by: mrazy1 on December 21, 2011, 05:02:30 pm: I am in need of a Cap kit for a pentronic ch-188 (CGA only).. Price and avaliblity??
Title: Re: Who needs monitor cap kits?
Post by: holaplaneta on December 09, 2012, 03:22:26 am: I would like

Kortek KT-2725 25" Cap Kit
680uf200v B+ filter
Title: Re: Who needs monitor cap kits?
Post by: arcade nut on January 11, 2013, 11:00:12 pm: I am in need of several,makvision, Sharp Image, Wells 7203 and a neotec NT-S501 also need a L701 on a wells 7400, if you got it, will PM you tomorrow :applaud:
Title: Re: Who needs monitor cap kits?
Post by: SavannahLion on January 11, 2013, 11:07:56 pm: The original post dates back to 2009. Is the offer still even on the table?
Title: Re: Who needs monitor cap kits?
Post by: arcade nut on January 11, 2013, 11:15:30 pm: sorry, I`m a newbie and saw the Dec 2012 date, I hope someone can help
Title: Re: Who needs monitor cap kits?
Post by: PL1 on January 12, 2013, 12:27:51 am: Take a look at http://www.therealbobroberts.net/caps.html (http://www.therealbobroberts.net/caps.html).

He's a really great guy.

Don't remember anyone having a negative experience when dealing with him.

Scott
Title: Re: Who needs monitor cap kits?
Post by: SirPeale on February 06, 2013, 01:08:27 pm: I still sell cap kits, yes! I even have a storefront:

http://www.highscoresrepair.com/store/index.php?main_page=index&cPath=9_8 (http://www.highscoresrepair.com/store/index.php?main_page=index&cPath=9_8)

Just the ones on the site, at this moment.