The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: sirhcman@aol.com on July 26, 2002, 02:12:58 am
-
A way to use a EYGO 19" monitor for vertical games but leaving the monitor in horizontal mode? 320 x 240 usually cuts off the bottoms of the games..For example On Ms PacMan I cant see the last row of dots or the score I am accumulating..I am just running windows mame. Should I use a different program that might help me view these games better? 640 x 48 mode on pacman looks so small I need a magnifying glass to play..Any help is appreciated!
-
okay use mame32 and leave it default..then just choose rotate screen..thats all..full screen vertical games..i have 19" eygo..so i knew how it was at the begining..
-
Hey thanks for the help! I await in anticipation once I get the cabinet all back together and test it out! Thanks again
BTW: Are there any sites out there that give info on these eygo monitors, or any help manuals? TIA!
-
sorry dude..you get nothing from these monitor..i suggest dont even try to look..you will kill yourself over looking around and finding NOTHIN ;D
-
Sounds like someone has een looking for awhile :) thanks!
-
heheh..damn right..before i actually bought it..i thought it would be super crappy because of what i paid..but its the best monitor ever..
-
i bought mine off a guy on ebay for 150, i thought it was a pretty damn good deal! ;D
-
way to go ;D
i paid same..i feel kinda evil..because the deal is too good to be true..i recomand to anyone however my post is totally worthless :P,because there is no problem here that we are trying to solve.
-
Here's the specs for the eygo 19inch that I've been going by for my advance mame setup up, hope its of some help...
Mine is rotated vertically in a cocktail cab and the games look mint. (Using Advance Mame under pure DOS)
Eygo 19" arcade monitors.
Specs:
Power Supply
Switch mode power supply
Dual AC input range
Jumper selectable
No isolation transformer required
Input Signal
Video - RGB analog, positive, 0.7 Vp-p.
Impedance - 75 ohms, terminated.
Rise Time - less than 25 nanoseconds.
Bandwidth - DC to 25 MHz (at - 3dB), mode 3.
Resolution - Model
1. 640 x 350 (70Hz refresh)
2. 640 x 400 (70Hz refresh)
3. 640 x 480 (60Hz refresh)
Sync. - TTL, positive or negative. Monitor circuitry will
automatically determine and adjust for VGA Horizontal Scan - Frequency 31.5KHz nominal
Capture range-30.5~32.5KHz
Active video - full width display of video
signals with active video from 25 to 28usec.
Linearity - plus or minus 5%
Vertical Scan - Frequency 60/70Hz
Capture range 47~85Hz
Linearity - plus or minus 5%
Picture Size Regulation
2%
Geometric Distortion
plus or minus 1.5% (max)
Environmental Conditions
Temperature 100 ~ 550C
Humidity 10~90%, no condensation
High Voltage
13"=23KV, 20"=25KV, with integral X-radiation
Shut-down protection
Degaussing
Automatic, operating at beginning of each power-up
cycle, provided the monitor has been turned off for
at least 20 minutes.