The NEW Build Your Own Arcade Controls
Main => Software Forum => Topic started by: Soxbrother on April 15, 2017, 05:45:04 am
-
Hi,
I'd like to use a Pac-Drive for lighting my start button and launch button (rom controlled)
maybe the coin slots as well.
See here for pictures of my pinball controller :
http://forum.arcadecontrols.com/index.php/topic,59359.msg1613865.html#msg1613865 (http://forum.arcadecontrols.com/index.php/topic,59359.msg1613865.html#msg1613865)
I found 2 tutorials, but the tutorials are a few years old.
Maybe things have changed and you have to use other files and do something different to get it working ?
Is there anyone who uses the pac-drive for rom-controlled lighting of their leds ?
I hope I can use the pac-drive for this.
For altering the script of the tables, do you have to use a certain tool ?
( like the dof config tool, or is that for something else entirely ? )
Probably just manually edit each table script ?
Thanks in advance for the help.
-
You should start by looking at the DOF and the DOF configurator tool
https://directoutput.github.io/DirectOutput/installation.html (https://directoutput.github.io/DirectOutput/installation.html)
http://configtool.vpuniverse.com/login.php (http://configtool.vpuniverse.com/login.php)
Hope this helps.
Pitou!