The NEW Build Your Own Arcade Controls
Main => Raspberry Pi & Dev Board => Topic started by: DaOld Man on March 29, 2015, 02:44:07 pm
-
I know we need to start and keep Pi projects in the "Project Announcements" section, but what say we make a sticky on here that gives links to pi projects?
Simliar to the "post links to your rotating project" in Automated projects.
-
Stickied. ;D
Scott
-
Here's mine: http://forum.arcadecontrols.com/index.php/topic,141979.0.html (http://forum.arcadecontrols.com/index.php/topic,141979.0.html)
-
Here is my Raspberry PI miniarcade-
http://forum.arcadecontrols.com/index.php/topic,145187.0.html (http://forum.arcadecontrols.com/index.php/topic,145187.0.html)
(http://www.dalpiasdev.com/images/Miniarcade/01Small.jpg)
-
Moon Patrol (Scratch built replica, Jakobud plans, RPi powered)
http://forum.arcadecontrols.com/index.php/topic,141846.0.html (http://forum.arcadecontrols.com/index.php/topic,141846.0.html)
Started: 16 June 2014
Complete: 13 December 2014
(http://i.imgur.com/CahlxYAl.jpg)
-
Haruman Pretendo kit powered by a RPI 2 B. It's still a WIP. The monitor is an HP 1825(18.1"), 14lb beast.
http://forum.arcadecontrols.com/index.php/topic,146245.0.html (http://forum.arcadecontrols.com/index.php/topic,146245.0.html)
-
My attempt at putting a RPi in a NES case.
http://forum.arcadecontrols.com/index.php/topic,146625.0.html (http://forum.arcadecontrols.com/index.php/topic,146625.0.html)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=335057;image)
-
Here is my Pi in an SNES case project
http://forum.arcadecontrols.com/index.php/topic,147154.0.html (http://forum.arcadecontrols.com/index.php/topic,147154.0.html)
(https://lh3.googleusercontent.com/-7eFhUDNyW8I/VeNf5a2NvsI/AAAAAAAAS7Y/XgNy1f1VuDI/s1280-Ic42/20150830_150620.jpg)
-
Here's mine ;D
http://www.arcadewinkel.nl/blog/de-rpi2-1-speler-bartop-arcade-van-mario.html (http://www.arcadewinkel.nl/blog/de-rpi2-1-speler-bartop-arcade-van-mario.html)
(http://www.arcadewinkel.nl/image/data/blog/builds/2015/mario-rpi-bartop-bouwpakket/rpi-bartop-arcade-mario(8).JPG)
-
This is my rpi project:
http://www.aussiearcade.com.au/showthread.php/67986-JAMMA-board-from-Raspberry-PI (http://www.aussiearcade.com.au/showthread.php/67986-JAMMA-board-from-Raspberry-PI)
-
Here's my project http://forum.arcadecontrols.com/index.php/topic,150400.0.html (http://forum.arcadecontrols.com/index.php/topic,150400.0.html)
this is just a mod, rather than a build. This is a hack of the ion icade Bluetooth controller, with an added 7 inch hdmi screen and some new buttons. A raspberry pi 3 and an ipac keyboard encoder that I had lying around from a previous project.
-
Here's my fresh completed build - http://forum.arcadecontrols.com/index.php/topic,150946.0.html (http://forum.arcadecontrols.com/index.php/topic,150946.0.html)
-
I uploaded a video of my Raspberry Pi 2 Bartop Arcade here
https://www.youtube.com/watch?v=RgOwztp9Rec&hd=1 (https://www.youtube.com/watch?v=RgOwztp9Rec&hd=1)
-
Suppose this one should be added here also, RetroWonder - Pi powered mini bar-top
Started - 29th April 2016
Finished - 10th July 2016
http://forum.arcadecontrols.com/index.php/topic,151195.0.html (http://forum.arcadecontrols.com/index.php/topic,151195.0.html)
(https://c8.staticflickr.com/9/8836/28200024495_f36e647d2b_c.jpg) (https://flic.kr/p/JXWuNT)
Retro Wonder 02 (https://flic.kr/p/JXWuNT) by Andy Baker (https://www.flickr.com/photos/andybakeruk/), on Flickr
-
....and here is my Raspberry Pi (RetroPie) Cocktail Cabinet.
http://forum.arcadecontrols.com/index.php/topic,151653.0.html?PHPSESSID=p8mmfrfhn6scminrlt3rtfaab4 (http://forum.arcadecontrols.com/index.php/topic,151653.0.html?PHPSESSID=p8mmfrfhn6scminrlt3rtfaab4)
(https://cdn.instructables.com/FXI/LX3R/ISY3PD7U/FXILX3RISY3PD7U.LARGE.jpg)
or here is a direct link to the fully detailed "Instructable"
http://www.instructables.com/id/RetroPie-Arcade-Cabinet-Cocktail-Style/ (http://www.instructables.com/id/RetroPie-Arcade-Cabinet-Cocktail-Style/)
..hope you like it!
-
Here is my two player bartop project in progress. Bought a pi3 and probably will run Retropie on it.
http://forum.arcadecontrols.com/index.php?topic=151614.0
-
Here's my Space Invaders Themed Bartop Cabinet (UK) https://retropie.org.uk/forum/topic/5593/space-invaders-themed-bartop-arcade-uk-completed (https://retropie.org.uk/forum/topic/5593/space-invaders-themed-bartop-arcade-uk-completed)
-
Raspi 3 Steepletone project: http://forum.arcadecontrols.com/index.php/topic,153047.0.html (http://forum.arcadecontrols.com/index.php/topic,153047.0.html)
(http://retro.zombiesbyte.com/images/site/project-louby-tunes.png)
-
I installed an RPi in a non working Sega Genesis case. I did not do a build thread but I can, if interest is high.
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=356527;image)
-
A couple of my "mini" Pi Projects
TMNT Themed ICade
http://forum.arcadecontrols.com/index.php/topic,153590.0.html (http://forum.arcadecontrols.com/index.php/topic,153590.0.html)
Afterburner Themed Flight Cabinet
http://forum.arcadecontrols.com/index.php/topic,153592.0.html (http://forum.arcadecontrols.com/index.php/topic,153592.0.html)
(http://www.sims-net.co.uk/arcade/pi-cades.JPG)
Mini Golden Tee Machines
(http://www.sims-net.co.uk/arcade/IMG_5982.JPG)
(http://www.sims-net.co.uk/arcade/IMG_6323.JPG)
-
Here's mine...
(http://i137.photobucket.com/albums/q227/sKotbucket/MAME%20Cabinet/5675C696-B4E1-462B-8FA2-EE850657E1F9_zpsodirfofl.jpg) (http://s137.photobucket.com/user/sKotbucket/media/MAME%20Cabinet/5675C696-B4E1-462B-8FA2-EE850657E1F9_zpsodirfofl.jpg.html)
(http://i137.photobucket.com/albums/q227/sKotbucket/MAME%20Cabinet/4E0D6610-4DCB-4583-810C-C7385E2C630E_zpsk3iwb8tw.jpg) (http://s137.photobucket.com/user/sKotbucket/media/MAME%20Cabinet/4E0D6610-4DCB-4583-810C-C7385E2C630E_zpsk3iwb8tw.jpg.html)
http://forum.arcadecontrols.com/index.php/topic,153970.0.html (http://forum.arcadecontrols.com/index.php/topic,153970.0.html)
-
Here are my projects with links to their build threads. All my projects are also linked in my signature.
This one is still WIP. Also found the official "Powered by Pi" logo for this one
(https://farm5.staticflickr.com/4240/35271072782_a6703ca351_o.png) (http://forum.arcadecontrols.com/index.php/topic,154544.0.html)
This one is done.
(https://c2.staticflickr.com/6/5821/30849956155_3ffd3b9a0d_o.png) (http://forum.arcadecontrols.com/index.php/topic,151826.0.html)
-
Heres mine:
http://forum.arcadecontrols.com/index.php/topic,155300.0.html (http://forum.arcadecontrols.com/index.php/topic,155300.0.html)
-
Here is my project called the Millennium Pi and it portable!(https://uploads.tapatalk-cdn.com/20171115/68eebfc6965ca41d1c59f960fc58879c.jpg)(https://uploads.tapatalk-cdn.com/20171115/b5f4c4607c587ec5404e383ac2c63085.jpg)(https://uploads.tapatalk-cdn.com/20171115/5a978f830febafd771d730fc33c71f79.jpg)(https://uploads.tapatalk-cdn.com/20171115/1c843ebc2eb3a4cb56ae1d6b89948ebb.jpg)(https://uploads.tapatalk-cdn.com/20171115/ad6bc6a5c6186b20377e2c4563d7dcb4.jpg)(https://uploads.tapatalk-cdn.com/20171115/684dbe0484868c7a961e9e5a2420c507.jpg)
Sent from my Atari 2600
-
Here is my project called the Millennium Pi and it portable!(https://uploads.tapatalk-cdn.com/20171115/68eebfc6965ca41d1c59f960fc58879c.jpg)(https://uploads.tapatalk-cdn.com/20171115/b5f4c4607c587ec5404e383ac2c63085.jpg)(https://uploads.tapatalk-cdn.com/20171115/5a978f830febafd771d730fc33c71f79.jpg)(https://uploads.tapatalk-cdn.com/20171115/1c843ebc2eb3a4cb56ae1d6b89948ebb.jpg)(https://uploads.tapatalk-cdn.com/20171115/ad6bc6a5c6186b20377e2c4563d7dcb4.jpg)(https://uploads.tapatalk-cdn.com/20171115/684dbe0484868c7a961e9e5a2420c507.jpg)
Sent from my Atari 2600
Awesome idea for a case! I'm hoping to find an inexpensive R2D2 somewhere for something similar! But needless to say, "R2D2" and "cheap" are never in the same sentence, it seems. Haha
Sent from my Casio keyboard
-
new retropie cocktail 2player arcade built using a beer keg. Screen turns 90 degrees for vertical and horizonal games
-
Needed something to go with my Star Wars\70s themed spare bedroom, I call it PiTARI.
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=364307;image)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=364309;image)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=364303;image)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=364311;image)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=364305;image)
-
Good job DarthPaul. got any links to the build? I havent seen an 8 track player in a long time.
-
here is my N64 project. It is not technically a Raspberry Pi, but a different single board computer called the Odroid XU4. Full speed N64 and Dreamcast emulation!!!!
http://forum.arcadecontrols.com/index.php?topic=156294.0 (http://forum.arcadecontrols.com/index.php?topic=156294.0)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=364740;image)
-
Here is a link to my Bartop build. It’s a GRS cabinet running on raspberry Pi3 with HyperPi front end. You’ll also find links to an unboxing and build video. The Mars Attacks artwork was assembled by me, with images found on the internet, and printed by GRS.
http://forum.arcadecontrols.com/index.php/topic,156442.0.html (http://forum.arcadecontrols.com/index.php/topic,156442.0.html)
-
Keep up the great work!
-
here is my N64 project. It is not technically a Raspberry Pi, but a different single board computer called the Odroid XU4. Full speed N64 and Dreamcast emulation!!!!
http://forum.arcadecontrols.com/index.php?topic=156294.0 (http://forum.arcadecontrols.com/index.php?topic=156294.0)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=364740;image)
How you finding that XU4?
Ive read allot about them recently, sounds interesting.
-
Heres my photo booth project, using an RPi 2.
http://forum.arcadecontrols.com/index.php/topic,157648.0.html (http://forum.arcadecontrols.com/index.php/topic,157648.0.html)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=369043;image)
-
Nothing too fancy here, but it still turned out pretty cool
-
(https://3.bp.blogspot.com/-V9up9TGfVrk/Ww56aAJUe7I/AAAAAAAAOgE/Bjt5oBofqf8jdMcG4c_lU8cwHIIrZujzwCEwYBhgL/s1600/DSCN1713_risultato.JPG)
(https://1.bp.blogspot.com/-kL57bLttAnU/Ww56gr-Cp0I/AAAAAAAAOgM/srd6iPNVrCov9tCjT9z9An7I7lyskXejQCEwYBhgL/s1600/DSCN1732_risultato.JPG)
(https://1.bp.blogspot.com/-h9Qc52urLr0/Ww56h-xDcxI/AAAAAAAAOgU/uBtsx1Sy4vMZcApSUFTcskWQ2ZKxF9xhQCEwYBhgL/s1600/DSCN1738_risultato.JPG)
My ICECADE project!
Based on RPI 3, with spinner and rotate screen button (thanks to @DaOld Man :cheers: ) for TV screen.
http://supercoin.blogspot.com/2018/05/icecade-il-piccolo-progetto-raspberry.html (http://supercoin.blogspot.com/2018/05/icecade-il-piccolo-progetto-raspberry.html)
-
My ICECADE project!
Based on RPI 3, with spinner and rotate screen button (thanks to @DaOld Man :cheers: ) for TV screen.
http://supercoin.blogspot.com/2018/05/icecade-il-piccolo-progetto-raspberry.html (http://supercoin.blogspot.com/2018/05/icecade-il-piccolo-progetto-raspberry.html)
Beautiful machine!! Thanks for the kudos man.. It was a fun project.
-
Nice :)
-
It's a vertical RetroPie bartop with the key feature that the LED marquee will change to match the selected game. Also the characters on the sides are laser cut inlays and not stickers.
Did a full write-up with build instructions, files, scripts on Instructuables https://www.instructables.com/id/Vertical-Bartop-Arcade-With-Integrated-PIXEL-LED-D/
Video here too==>https://www.youtube.com/watch?v=krdcABgy68A
Would love any feedback, thanks!
-
here for me
http://forum.arcadecontrols.com/index.php/topic,159690.0.html (http://forum.arcadecontrols.com/index.php/topic,159690.0.html)
(https://i66.servimg.com/u/f66/20/00/24/50/receiv11.jpg) (https://servimg.com/view/20002450/22)
-
It's a vertical RetroPie bartop with the key feature that the LED marquee will change to match the selected game. Also the characters on the sides are laser cut inlays and not stickers.
That is very cool! I love the design. I want to build something smaller like that myself. Very well done!
J_K_M_A_N
-
It's a vertical RetroPie bartop with the key feature that the LED marquee will change to match the selected game. Also the characters on the sides are laser cut inlays and not stickers.
Very nice. :D
Posting a link to my Pi build here (about 50% done). Quite enjoying it so far and can definitely see me building more in the future. When I can sort out the power problems anyway! :banghead:
http://forum.arcadecontrols.com/index.php/topic,159855.0.html (http://forum.arcadecontrols.com/index.php/topic,159855.0.html)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=159740.0;attach=376572;image)
-
I don't have it posted on this board but it it is a Seeburg SCH1 Consolette converted with a Raspberry Pi Zero to play MP3's
https://www.audiokarma.org/forums/index.php?threads/seeburg-consolette-mp3-conversion-rasperry-pi-zero-w.889024/#post-13173629
I can post all of the gory details here if there is interest
-
Here's mine:
http://forum.arcadecontrols.com/index.php/topic,162443.0.html (http://forum.arcadecontrols.com/index.php/topic,162443.0.html)
(https://i.ibb.co/R3LW7gb/Overall.jpg)
-
I recently posted this in projects:
GameBoss Fully Functional Gameboy Costume. This fully functioning wearable GameBoy costume is Pi 3b+ powered with a Picade X Hat to handle the inputs and audio output.
http://forum.arcadecontrols.com/index.php/topic,163163.0.html
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=159740.0;attach=383709)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=159740.0;attach=383689;image)
-
This is my pi build. It started out with a full blown PC in it. It is now running a pi4. I may go back to a PC though as I am having trouble getting Aimtrak light guns and trackball working.
Clicking the pic will take you to the album that has some pics of the build process in it.
(https://live.staticflickr.com/65535/48531681532_582a5c8e2b.jpg) (https://flic.kr/s/aHsmLsegJT) (https://flic.kr/p/2gWzy6S)
-
Some kind of metal case on that?
-
My first pi build. Build it together with my youngest son. Next pi build on the way building with my oldest son.
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=159740.0;attach=385112)
Link to thread
http://forum.arcadecontrols.com/index.php/topic,163632.0.html
-
Any special features you particularly like?
-
Any special features you particularly like?
For my other cabinet i used a pc and hyperspin. Looks great, plays almost all of my games without trouble. But you have to spend hours upon hours to set everything up and looking the way you want.
So to keep cost down i went with the pi. It is pretty easy to setup, but i would say if you want to change stuff, you need to know how linux works. Or look to a gazillion youtube movies to get things the way you want.
The only problem i have is that not every game runs because of the older emulators.
-
Here is a RPi jukebox Im working on. (Both hard and software).
It is currently a work in progress. I will post a pic here when it is finished.
Just thought you guys might be interested in following.
Build thread is posted in Project Announcements.
http://forum.arcadecontrols.com/index.php/topic,164712.0.html