The NEW Build Your Own Arcade Controls
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: hypergaming on November 13, 2019, 08:59:22 pm
-
Hi friends!
I have an installation of Hyperspin with just MAME games ( no other systems, just MAME ), in the past this install was being use with an IPAC encoder.
I built my own cabinet and want to use this Hyperspin installation with my new Zero Delay encoder button set, at the moment I haven't been able to configure anything because I cant even access a MAME game to use my keyboard to configure keys yet.
here is the error I get when I hit " enter " on my keyboard to enter a game:
***" You are using Keymapper support but are not up-to-date with JoytoKey or cannot find JoyToKey.ini c:/Hyperspin\Hyperlaunch\Profiles\JoyToKey
Please Make sure you are running JoyToKey v5.1.0 or later. "***
The confusion is that I have a higher version of Joytokey installed already ( see image attached )
I also have the Joytokey.ini file in the profiles folder, is visible when I see it via windows explorer but not when I try to look for it via Hyperlaunch. ( see image )
attached are some images of the settings in Hyperlaunch, can someone tell be what I can do in order to bypass this error and be able to play MAME games! Thanks everyone so much :)
-
wow, not one comment or suggestion to fix my problem, I guess this is more complicated than I thought. I still appreciate everyone that took the time to read it. :)
-
wow, not one comment or suggestion to fix my problem, I guess this is more complicated than I thought. I still appreciate everyone that took the time to read it. :)
You need to specify the location of your Joy-to-Key program. It’s that tab that you have in the last picture.....you haven’t specified the location therefore when RocketLauncher is trying to load it, it doesn’t know where it is.
-
thanks for popping in, could you tell me how to do that? I don't have it clear if I have to create a Hyperspin profile, or a default profile? can you tell me specifically how to do this?
thank you! :)
-
Let me see if I can hook up my LCD tonight and refresh my memory on the steps...Basically though you click the green plus sign and browse to your joy2key.ini if memory serves....I’ll confirm.
-
awesome, I appreciate the help. I'll be looking for your info in the morning, thanks again man! :)
-
Hey man, apologies I couldn’t get to this till now. But I believe your issue lies here:
(https://uploads.tapatalk-cdn.com/20191117/9d205bd4915eb42ff63b60694938f889.jpg)
This is where you specify the location of your Joy2Key program. If you browse to where it is located and select it, then it should clear up your problems.