The NEW Build Your Own Arcade Controls
Main => Audio/Jukebox/MP3 Forum => Topic started by: Mary Lou on August 18, 2019, 01:17:28 pm
-
I have replaced battery and did full initialization. Error code comes up 14-04. At one point I had message reading Priority 00. Cannot play CD
-
14-04 indicates factory defaults are requested to be manually loaded.
-
Put it into service mode with the service switch. Turn off power to the jukebox with the power switch. Hold down the 1 & 0 on the keypad. Turn the power switch back on and wait until the display reads defaults loaded. Then you can release the 1 & 0. You may have to initialize the CD's again.