The NEW Build Your Own Arcade Controls
Main => Consoles => Topic started by: HornheaDD on April 18, 2021, 11:23:36 am
-
Hello, I have a Dreamcast MGCD and it works great - except for the controls. A DC controller works 100% but I'm trying to get it to work in my arcade cabinet (Neo25 MVS).
Ive seen a couple of places on the net that mention what is needed to be done to get controls on a cab to work, but I am at a loss of what it actually entails. I found this site (http://www.hehehe.org/), but the link he has to a forum for questions no longer works. I saw a couple of threads were posted in the past about it, but I dont know if the issue in them was resolved, and from what I can tell there are no real images to lok at.
From what I gathered, Pins 27/28 on the MGCD are wired for player action buttons, rather than ground as found on a standard JAMMA harness. I made a JAMMA edge extender with the goal of turning it into an adapter, I just don't exactly know what I need to change or where I need to rout extra wires. Ive attached an image here of my extender. Im just not sure where to go from here. Any help would be appreciated.