The NEW Build Your Own Arcade Controls
Main => Retail vendors => Topic started by: Lucian045 on October 02, 2013, 08:09:23 am
-
Hey all. I have a sticky on the Hyperspin forums. I am doing printing of graphics for arcade and pinball machines at a reasonable price. My thread is located here for arcade graphics http://hyperspin-fe.com/forums/topic/507-decals-and-printing-for-your-hyperspin-cabinet/...and (http://hyperspin-fe.com/forums/topic/507-decals-and-printing-for-your-hyperspin-cabinet/...and)]http://www.hyperspin-fe.com/forum/showthread.php?14155-Decals-and-Printing-for-your-HyperSpin-Cabinet...and http://hyperspin-fe.com/forums/topic/505-decals-and-printing-for-your-hyperpin-cabinet/ (http://hyperspin-fe.com/forums/topic/505-decals-and-printing-for-your-hyperpin-cabinet/) I have done many peoples cabinets and offer some low prices for the community. My information is located in the threads along with references from other people about the material I use and the quality. Send me an e-mail if you are interested and I will give you a quote.
Here are two links to my personal machines I built: http://www.hyperspin-fe.com/topic/601-video-man-hyperspin/ (http://www.hyperspin-fe.com/topic/601-video-man-hyperspin/) http://www.hyperspin-fe.com/topic/473-the-pin-reaper-423219-widebody/ (http://www.hyperspin-fe.com/topic/473-the-pin-reaper-423219-widebody/)
Thanks everyone and hopefully I can help anyone out with some graphics.
Brad (Lucian045)
2018
bjbowman045@gmail.com
Best to email if you are looking for a quote, don't always check this thread. Thanks everyone.
-
About time you got over here ;)
Top man is Brad. He does all my printing.
Flawless job.
WWW.Xtremepinball.com
-
Welcome, my friend! Looking forward to working with you!
-
Thanks Guys...been on the list of things to do. Been so busy with work and managing Hyperspin I completely forgot about this site! lol Would like to get this stickied but I understand if I need some more references from people on the forum.
-
+1
About time you got over here ;)
Top man is Brad. He does all my printing.
Flawless job.
WWW.Xtremepinball.com (http://WWW.Xtremepinball.com)
-
Had a few people contact me. For those looking for graphics please e-mail me. I have 3 sites I'm running around on so e-mail is easier for me and faster for you. Hopefully we can get this thread updated with some pictures of peoples cabinets. Thanks.
-
Hey all. I have a sticky on the Hyperspin forums. I am doing printing of graphics for arcade and pinball machines at a reasonable price. My thread is located here for arcade graphics http://www.hyperspin-fe.com/forum/showthread.php?14155-Decals-and-Printing-for-your-HyperSpin-Cabinet...and (http://www.hyperspin-fe.com/forum/showthread.php?14155-Decals-and-Printing-for-your-HyperSpin-Cabinet...and) here for Pinball http://www.hyperspin-fe.com/forum/showthread.php?14150-Decals-and-Printing-for-your-Hyperpin-Cabinet. (http://www.hyperspin-fe.com/forum/showthread.php?14150-Decals-and-Printing-for-your-Hyperpin-Cabinet.)
I have done many peoples cabinets and offer some low prices for the community. My information is located in the threads along with references from other people about the material I use and the quality. Send me an e-mail if you are interested and I will give you a quote.
Here are two links to my personal machines I built: http://www.hyperspin-fe.com/forum/showthread.php?13088-The-Pin-Reaper-42-quot-32-quot-19-quot-Widebody (http://www.hyperspin-fe.com/forum/showthread.php?16883-Video-Man-Hyperspin...[url=http://www.hyperspin-fe.com/forum/showthread.php?13088-The-Pin-Reaper-42-quot-32-quot-19-quot-Widebody)]http://www.hyperspin-fe.com/forum/showthread.php?16883-Video-Man-Hyperspin...http://www.hyperspin-fe.com/forum/showthread.php?13088-The-Pin-Reaper-42-quot-32-quot-19-quot-Widebody (http://www.hyperspin-fe.com/forum/showthread.php?13088-The-Pin-Reaper-42-quot-32-quot-19-quot-Widebody)[/url]
Thanks everyone and hopefully I can help anyone out with some graphics.
Brad (Lucian045)
Brad was an absolute pleasure to deal with and had a super quick turnaround. I was extremely happy with the work he had done for my CP, Marquee and side art.
Highly recommended.
John (BamBam1963)
-
Doing a bump to let people know about my services. Thanks to everyone who has ordered from me and the recommendations from some of you on this site. Happy New Year everyone!
-
Oh man, where do I begin?
If you need any side art printed, don't hesitate to contact Lucian045 (Brad). His stuff is QUALITY!!!
I did an initial inquiry, and he got back to me within a day. We went to email by his request for the rest of the transaction, which worked well. I sent him some ideas, he sent me a proof. I changed some stuff up, and he was great about sending me a revised quote.
Now, I have access to a friend who can pretty much do the same thing for free, but I went with Lucian045 because of his rep on Hyperspin and because I really wanted my art to pop (my buddy's vinyl is more for general stickers, whereas Brad's is more durable, commercial vinyl.
He sent me a very reasonable quote for 4 pieces of art for my Macross project (with shipping included). Two regular 18x24 side art pieces, plus 2 "lower" side art pieces that were going to be a little more of a challenge because they needed to be specially die cut. I explained what I wanted, he told me no problem, and I pulled the trigger this Monday morning, paying via Paypal. He gave me updates on the process, and by Wednesday, I had a tracking number, and by today (Friday) I had art in hand. I was extremely impressed with the speed.
The art came in a rolled tube, sides taped and packaged securely. He threw in a felt-edged application squeegee, which was a godsend. I was immediately impressed by the quality of the vinyl. It felt thick, not cheap, not flimsy. The die cut pieces came with premask that I needed to put on, and the side art wasn't masked. I used painters tape to hang the side art where I wanted it, then peeled back a little from the top, slowly working my way down using the squeegee. The felt did a good job of securing the vinyl. The quality of the vinyl allowed me to press out any air bubble immediately. I went slowly, and the whole piece went on with NO ISSUE, NO BUBBLES, NO LIFTING. The same thing happened with the other side. Beautiful, man.
The same thing with the die cut bottoms. I applied the mask to one side, hung it where I wanted, then pressed it on to the cab with no issues. It looks awesome. See my Macross thread for more photos.
http://forum.arcadecontrols.com/index.php/topic,137636.0.html (http://forum.arcadecontrols.com/index.php/topic,137636.0.html)
Thanks, Brad! You're the best!
-
Brad comes through again! This stuff is TOP NOTCH. Great quality, super easy to work with and durable as all get out. Not to mention Brad is a true arcade/pinball fanatic - and a stand up guy!
(http://i.imgur.com/Q47y4xOl.jpg)
(http://i.imgur.com/x6O73lMl.jpg)
Thread over here:
http://forum.arcadecontrols.com/index.php/topic,139460.0.html (http://forum.arcadecontrols.com/index.php/topic,139460.0.html)
-
Do you ship to Canada ?
I'll be needing to get my Punch-Out bartop stuff printed (bezel, CPO, marquee, side art x 2).
The bezel and sideart would need to be die cut.
If the price is good I'd like to add some Final Fight artwork as well as Bad Dudes.
Get all my cabinets done @ the one time.
-
So what do you charge for a marquee?
-
Do you ship to Canada ?
I'll be needing to get my Punch-Out bartop stuff printed (bezel, CPO, marquee, side art x 2).
The bezel and sideart would need to be die cut.
If the price is good I'd like to add some Final Fight artwork as well as Bad Dudes.
Get all my cabinets done @ the one time.
I can ship to Canada NP. Shoot me an email with the dimensions and I'll give you a cost bjbowman045@gmail.com
-
So what do you charge for a marquee?
Marquees general run around $25-$35 depending on the size. They are printed on translucent film which needs to be applied directly to the plexi.
-
Been getting a lot of PMs from people...please use this email bjbowman045@gmail.com to contact me about pricing. Using the PM gets confusing to keep track of. Sending the size of your artwork will get you a quote much faster and your shipping area. Thanks.
-
All I can say is: Wow.
I've dealt with a lot of printing companies in my time and Brad's service and experience trumps them all. Seriously, a guy with this many years experience in the industry, AND an arcade builder himself, that's a win.
He was always there to answer my questions, and address my concerns. He Knows his stuff and has a great customer service ethic. Most importantly: I'm picky as hell, and he patiently put up with that. I will continue to do any and all work I need printed through Brad.
(https://farm4.staticflickr.com/3863/14255483690_5c8c366bc8_c.jpg)
(https://farm6.staticflickr.com/5546/14255454519_198dc088e1_c.jpg)
-
Here is yet another example of Brad's AMAZING work.
I hired a Transformers Comic Book artist to design my art work and Brad to print it for me. It has been on my VPin for over a year now and still looks like the day I put it on!
(http://i19.photobucket.com/albums/b185/viriiguy/DSCN2473_zps93ff71ec.jpg)
(http://i19.photobucket.com/albums/b185/viriiguy/DSCN2472_zps8b6ed8ec.jpg)
(http://i19.photobucket.com/albums/b185/viriiguy/DSCN2469_zps6a6ce142.jpg)
(http://i19.photobucket.com/albums/b185/viriiguy/DSCN2468_zpsc44e9e43.jpg)
-
Hey everyone. Thread has not been updated in a while. Still printing and taking orders. Thanks to everyone who has ordered from me. Let me know if you need something and if you have ordered from me, please post some pics in the thread.
-
Almost done my build, Thought i'd give the thread a little bump with a new picture of the artwork in place. The polycarb laminate on the control panel is holding up like a boss! Also looks wickedly authentic. So very happy I used Brad for the art!
(https://farm4.staticflickr.com/3948/15467126070_600053332e_c.jpg)
-
Awesome Job Chance...great build. Thanks for sharing.
-
I have been working with Brad over the past two weeks for my FFJR cab and he has far surpassed a high quality of customer service. I received my artwork yesterday. The artwork was packaged very well. One color was slightly off on the CP and Monitor Bezel and Brad is working with me to correct it. I would highly recommend using Brad.
-
Brad offers a top-notch service to cab-builders. He's an asset to our community and his product is second to none. Deal with confidence!
Thank you, Brad! As promised, here are some pics of the "final product" :
(http://i1256.photobucket.com/albums/ii483/ghetoprobe/Racing%20Arcade/IMG_9480_zps46daba2c.jpg)
(http://i1256.photobucket.com/albums/ii483/ghetoprobe/Racing%20Arcade/IMG_9473_zps0783b4f7.jpg)
-
Damn sexy ghetoprobe! Awesome build...I want one now, or another pinball machine...or both...wish I had more room in the house lol
-
can I wrap the vinyl around the cabinet and install t-molding? something like this?
have you printed anything for weecade widescreen? I need 2 sets. both sidearts, control panel top and front, marquee(translucent material).
let me know how much it will cost me. an estimate will do so. if you dont have the weecade dimensions, I can get them for you.
-
You still need to trim the vinyl graphic where the t-molding meets so I am not sure I fully understand your question. There would be no need to wrap the graphic over the t-molding area as you will need to cut it at the t-molding groove. I suppose you could wrap the vinyl around to the groove area and then install the t-molding if you didn't want to trim the graphic at all.
-
I dont wanna trim, I prefer the tmolding wrapping around the artwork like the picture I posted. your material is "flexible" correct?? let me know how much it will cost.
-
got your PM, will get back to you with the dimensions.
-
Fastest and best way to get ahold of me is to email bjbowman045@gmail.com with the quantity of what you need and your dimensions. I need to keep all information in my email as doing business thru PM's is too difficult. I am on multiple forums and it gets way too confusing. SNAAKE, you have been PM and please send your info to my email address. Thanks everyone! If you have gotten some artwork thru me from this site please post in this thread and share your builds!
-
Just picked up my Artwork from Brad, can't wait to get my pedestal together!
Gotta say, this guy goes the extra mile, more than willing to take the time to actually talk with you on the phone about your needs.
Thanks Brad for the quick turn around time as well!
(http://home.comcast.net/~fmzip/Ebay/spaceart.jpg)
-
Just picked up my Artwork from Brad, can't wait to get my pedestal together!
Gotta say, this guy goes the extra mile, more than willing to take the time to actually talk with you on the phone about your needs.
Thanks Brad for the quick turn around time as well!
(http://home.comcast.net/~fmzip/Ebay/spaceart.jpg)
NP! Thanks for posting...looking forward to the final build.
-
Still rockin' graphics people. Thanks for all the orders so far. I'm always lurking around this thread but I don't always post. If you need something send me an email. Happy building!
-
Still rockin' graphics people. Thanks for all the orders so far. I'm always lurking around this thread but I don't always post. If you need something send me an email. Happy building!
I recommended you to the ZapCon organizers when they were looking for someone to print their Space Paranoids artwork. I saw it at the show, it looks great as always!
-
Still rockin' graphics people. Thanks for all the orders so far. I'm always lurking around this thread but I don't always post. If you need something send me an email. Happy building!
I recommended you to the ZapCon organizers when they were looking for someone to print their Space Paranoids artwork. I saw it at the show, it looks great as always!
Much appreciated Yotsuya! Thanks.
-
Still rockin' graphics people. Thanks for all the orders so far. I'm always lurking around this thread but I don't always post. If you need something send me an email. Happy building!
I recommended you to the ZapCon organizers when they were looking for someone to print their Space Paranoids artwork. I saw it at the show, it looks great as always!
Much appreciated Yotsuya! Thanks.
No problem. That machine was voted one of the fan favorites, so your quality artwork as been featured on the last two winners! :cheers:
-
Thank you Brad for the excellent quality artwork for my Dream Machine!
(http://i622.photobucket.com/albums/tt301/vidi0t/Forum%20files/arcade%20forums/IMG_1040_zpsumi58mgm.jpg) (http://s622.photobucket.com/user/vidi0t/media/Forum%20files/arcade%20forums/IMG_1040_zpsumi58mgm.jpg.html)
(http://i622.photobucket.com/albums/tt301/vidi0t/Forum%20files/arcade%20forums/IMG_1034_zpssmwu73aw.jpg) (http://s622.photobucket.com/user/vidi0t/media/Forum%20files/arcade%20forums/IMG_1034_zpssmwu73aw.jpg.html)
(http://i622.photobucket.com/albums/tt301/vidi0t/Forum%20files/arcade%20forums/IMG_1043_zpshwk8bd09.jpg) (http://s622.photobucket.com/user/vidi0t/media/Forum%20files/arcade%20forums/IMG_1043_zpshwk8bd09.jpg.html)
(http://i622.photobucket.com/albums/tt301/vidi0t/Forum%20files/arcade%20forums/IMG_1044_zps7flkb409.jpg) (http://s622.photobucket.com/user/vidi0t/media/Forum%20files/arcade%20forums/IMG_1044_zps7flkb409.jpg.html)
-
Just updating the thread and letting everyone know I'm still here. Thanks for all the orders so far and please post pics in the thread.
-
Brad does excellent prints. Highly reccomend him for your printing. Here is some artwork he printed for my projects.
(http://i1106.photobucket.com/albums/h379/vwalbridge/Mini%20DK/103.jpg)
(http://i1106.photobucket.com/albums/h379/vwalbridge/Micro%20Coleco%2003.jpg)
-
I had Brad print my artwork for my first cab after getting several references to him from members who posted in my build thread and glad I did!
Great customer service and quick to answer questions. The vinyl arrived quick and well packaged in a very thick durable tube.
The vinyl is very high quality and was very easy to work. Stuck down great and the quality is awesome!
I will use Brad for any future projects!
-
Total rush seeing the art on the cab instead of in a render, huh?
-
Hey Everyone...working on Reverse printed Marquees and Bezels. Still ironing out the technique but figured I would share some pics. Once I get this process worked out I would be interested to know if there is a desire for reverse printed artwork done this way. Let me know what you think.
(http://i66.tinypic.com/5x8vad.jpg)
(http://i64.tinypic.com/aqhd5.jpg)
-
Hey Everyone...working on Reverse printed Marquees and Bezels. Still ironing out the technique but figured I would share some pics. Once I get this process worked out I would be interested to know if there is a desire for reverse printed artwork done this way. Let me know what you think.
(http://i66.tinypic.com/5x8vad.jpg)
(http://i64.tinypic.com/aqhd5.jpg)
Hell yeah, sign me up!
-
Hey Everyone...working on Reverse printed Marquees and Bezels. Still ironing out the technique but figured I would share some pics. Once I get this process worked out I would be interested to know if there is a desire for reverse printed artwork done this way. Let me know what you think.
Just so I understand, by "Reverse Printed", does that mean printed directly on the backside of the plexi? or is it vinyl printed on the sticky side so it's adhered to the backside of the plexi?
-
.
-
It's vinyl printed in reverse then applied to the back.
Sweet! I'm gonna need a Ms Pac cocktail glass printed soon and this sounds perfect.
-
Thanks to Brad for the great artwork for my Neon Flynn's cabinet! Great service and quality. This stuff was super easy to install as well.
-
I can recco brad for sure!… he's printed a lot of my clients work every time its come out awesome. :applaud:
His printer is top of the line.
-
Thanks Gbeef! Love looking at your designs, they always look awesome!
-
Please remember to email me at bjbowman045@gmail.com with inquiries...please do not PM me as I don't always check the site and sometimes the pm email gets spammed. Doing a nice order for a forum member with a reverse printed marquee...will let everyone know if its approved and ready for the mainstream.
-
..
-
Looks awesome Chance! Thanks a lot.
-
Very nice! Lucian, you will have another Canadian customer in 2016 :)
-
So what does reverse printing run? Inquiring minds want to know.
-
Still figuring out the cost...trying to nail down a supplier for clear plastic that's reasonable. I will be posting soon what a total package like this will cost and also how much a reverse printed marquee will run solo.
-
So what does reverse printing run? Inquiring minds want to know.
Curious as well. Thinking of getting a Double-Donkey-Kong marquee for my DK Jr. I can get the plexi local so all I'd need is the reverse printed image.
-
I can get the plexi local so all I'd need is the reverse printed image.
Pretty sure he is printing directly to the plexi, so you getting it yourself wouldn't be real feasible unless you lived in the same town due to shipping plexi to him and then shipping it back to you.
-
I can get the plexi local so all I'd need is the reverse printed image.
Pretty sure he is printing directly to the plexi, so you getting it yourself wouldn't be real feasible unless you lived in the same town due to shipping plexi to him and then shipping it back to you.
Oh, Ok. Thanks for clarifying!
-
Actually the process is not directly printed to the plexi but two different films. The technique can be a bit tricky however but if someone what's to try it themselves than more power to them. Over the next couple of days I will have a price, getting stuff ready for Christmas now. Would like to gauge how many people are interested in full packages like Chance's or looking for reverse printed marquees only. Please let me know.
-
Actually the process is not directly printed to the plexi but two different films.
So it'd be possible to order the reverse printed films and apply them ourselves? Say, for example, to the underside of cocktail glass?
-
What is the advantage of this over translite? This is permanently adhered, right? Anything else?
-
Actually the process is not directly printed to the plexi but two different films.
So it'd be possible to order the reverse printed films and apply them ourselves? Say, for example, to the underside of cocktail glass?
Yes it can be done for cocktail, could be a challenge but it can be done. Send me N email and we can talk as that is very specific.
-
What is the advantage of this over translite? This is permanently adhered, right? Anything else?
Yes permanent...creates a screen printed look that film on the outside does not create. Makes it look like it is factory.
-
Actually the process is not directly printed to the plexi but two different films. The technique can be a bit tricky however but if someone what's to try it themselves than more power to them. Over the next couple of days I will have a price, getting stuff ready for Christmas now. Would like to gauge how many people are interested in full packages like Chance's or looking for reverse printed marquees only. Please let me know.
I have a background in graphics so the application wouldn't be an issue. I'm guessing you are doing what we've done in the past for similar projects. I'm guessing you're reverse printing on clear and overlaying it with translucent white? We just don't stock a lot of translucent vinyl and it wouldn't really be cost effective for me to order a full roll or two for a single marquee.
-
Actually the process is not directly printed to the plexi but two different films. The technique can be a bit tricky however but if someone what's to try it themselves than more power to them. Over the next couple of days I will have a price, getting stuff ready for Christmas now. Would like to gauge how many people are interested in full packages like Chance's or looking for reverse printed marquees only. Please let me know.
I have a background in graphics so the application wouldn't be an issue. I'm guessing you are doing what we've done in the past for similar projects. I'm guessing you're reverse printing on clear and overlaying it with translucent white? We just don't stock a lot of translucent vinyl and it wouldn't really be cost effective for me to order a full roll or two for a single marquee.
Shoot me an email and we can talk.
-
Hey Everyone.
So I'm currently working on getting all the artwork together and eventually setting up some sort of website, but for now I will take orders thru email. Going to make a separate account eventually, but for now email bjbowman045@gmail.com
Package
2x Side Art Die-Cut
1x Control Panel
1x Bezel Artwork Die-Cut
1x Reverse printed Marquee Applied to 1/4" Clear Plastic
Total cost: $215 plus shipping (Payment will be thru Paypal)
Current Artwork:
Chances' Ultimate Donkey Kong
Mario Bros
Donkey Kong
Donkey Kong Junior
More to Come once I get all the artwork completed.
If you want a custom one or are just looking for a reverse printed marquee or bezel I can do this, but we will need to talk. Again, email is the best...please do not PM me. If I don't keep all this in email form it will get way too confusing for me. If you are interested in something please send me an email. Sometimes I feel talking on the phone is best, so please leave your cell if you are in the US and I will get back to you if I feel a conversation will be faster than answering your questions in an email. Happy New Year everyone!
-
Thanks Brad for the high quality prints and service.
No doubt that I'm gonna buy again for future projects!
My 1st Arcade Cabinet:
(https://dl.dropboxusercontent.com/u/52657948/Arcade%20Cabinet/2016-01-07%2010.15.47.jpg)
(https://dl.dropboxusercontent.com/u/52657948/Arcade%20Cabinet/2016-01-07%2010.15.36.jpg)
(https://dl.dropboxusercontent.com/u/52657948/Arcade%20Cabinet/2016-01-07%2010.16.02.jpg)
(https://dl.dropboxusercontent.com/u/52657948/Arcade%20Cabinet/2016-01-07%2010.17.05.jpg)
(https://dl.dropboxusercontent.com/u/52657948/Arcade%20Cabinet/2016-01-07%2010.17.11.jpg)
-
Hey all, just updating the thread. Thanks for all the orders so far...not everyone posts in the thread but I am still printing. If you need something don't hesitate to email. Thanks.
-
How much for something like this
-
Please send all inquiries to bjbowman045@gmail.com...I need sizes to calculate a price. Thanks.
-
Hi Brad,
Paul (yotsuya) recomended you to me. I was wondering if you are taking on any projects at this time. I have a couple of cabinets that I am working on and could use some new graphics. I have a lot of the stuff ready..loooking for a good print man and if you can improve on the design that would be great. You can email me directly at aurumvorax.inc@hotmail.com Thanks in advance! Have a great weekend and I look forward to hearing from you soon.
Cheers,
Keith
-
Hey everyone, just updating the thread. Orders are flowing so if you need something please email me. I appreciate all the orders and the great artwork I've been seeing. Pretty soon it will be time for a couple of my own builds...exciting!
-
Updating the thread. If you have ordered from this thread please post your experience might be opening a Website for orders after the summer. Thanks for the orders so far.
-
Just a reminder, please email bjbowman045@gmail.com about your artwork. Thanks.
-
I ordered some 14" round side art and a new CPO for my sister's family cabinet (switching it from single player layout 60-in-1 to 2 player MAME system) from Lucian045 last week. He was very helpful, the "product" was good and turnaround time was quick. Items were well packed. I will post a pic when I get the CPO applied in the next few days. And I appreciate him giving such attention to what I assume is a small-ish artwork order- I will not hesitate to hit him up again for bigger projects in the future. Thanks Lucian045!
-
Ordered my vinyls from here and Brad is the ---steaming pile of meadow muffin---. I suck at Photoshop and don't know much about sizing and vectoring and Brad helped me out with all of it. Was cheaper than every where else and turned out much better than others too. Totally happy with how everything came and will be ordering from him again in the future. Thanks again man! (http://uploads.tapatalk-cdn.com/20160918/8099b979f14a48f1589456c70cfc80b9.jpg)(http://uploads.tapatalk-cdn.com/20160918/9cf29502ede395c9e8ebd0bb9acc2b3b.jpg)(http://uploads.tapatalk-cdn.com/20160918/a79b811ad4df929791aaaf52f0514e39.jpg)
-
Great job on your cabinet! Thanks for posting!
-
Just updating the thread...been printing away and busy with orders. Thanks to all who have ordered from me. If you need something send me an email bjbowman045@gmail.com. Thanks again.
-
Happy New Year! If you need something send me an email bjbowman045@gmail.com. If you ordered some artwork from me and care to post your experience please do. Thanks again for all the orders and here's to 2017!
-
A big thank you Brad! I love the Centipede artwork. My cab is completed and I wanted to share the results with you. The reverse printed translight marquee is incredible! Super impressed as always with your work!
(http://i622.photobucket.com/albums/tt301/vidi0t/Forum%20files/arcade%20forums/IMG_2803_zpsnmiictks.jpg) (http://s622.photobucket.com/user/vidi0t/media/Forum%20files/arcade%20forums/IMG_2803_zpsnmiictks.jpg.html)
(http://i622.photobucket.com/albums/tt301/vidi0t/Forum%20files/arcade%20forums/IMG_2805_zpse54ti9bk.jpg) (http://s622.photobucket.com/user/vidi0t/media/Forum%20files/arcade%20forums/IMG_2805_zpse54ti9bk.jpg.html)
(http://i622.photobucket.com/albums/tt301/vidi0t/Forum%20files/arcade%20forums/IMG_2799_zpsh4vgmqu1.jpg) (http://s622.photobucket.com/user/vidi0t/media/Forum%20files/arcade%20forums/IMG_2799_zpsh4vgmqu1.jpg.html)
-
Nice job on the build Vidiot...looks awesome.
Hey all...got myself a new printer, even better quality and faster printing time for me...definitely a plus. Still taking orders for the community. Send me an email if you need something. bjbowman045@gmail.com. Thanks for all the orders and those who have shared on the thread.
-
Just wanted to drop a in and sing this vendor some praise. Super quick turn around, very responsive, all around awesome experience. Did the vinyl for my yoke and CP inserts on the SW Cabaret. Couldn't be happier with how it turned out. Awesomesauce!
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149895.0;attach=357074;image)
-
Still here and still printing. Drop me a line if you need something. Thanks
-
Hi.
I saw the recommendations for digital printing from others. I'm looking for an control panel printout for an arcade I'm building. It will be about 37" x 20" Its a NES theme like below so a little simple. I's also like to get a NINTENDO decal for the marquee. What do you need from me and what is an estimated price for this?
(http://i.imgur.com/V5KXoyv.jpg)
(http://i.imgur.com/RENWBJF.jpg)
-
Send me an email to bjbowman045@gmail.com and we can discuss what you need. Thanks.
-
Where are you located Brad?
-
I'm in CT
-
Just a quick update, still taking orders. Thanks for everyone who has contacted me so far. Need a quote send it to bjbowman045@gmail.com. Happy building!
-
Just keeping the thread current. Thanks for the orders so far. Let me know if you need something.
-
Yes still printing, let me know what you need. :)
-
Still here all...send me an email bjbowman045@gmail.com if you need something. Thanks.
-
For marquees do you do translite? Or only reverse printing?
-
.
-
I do both reverse printing and translites. However, the Translite I use is a film that must be applied to the Plexi. If you need anything please send an email bjbowman045@gmail.com. Merry Christmas everyone and here's to 2018!
-
Lucian was great to work with! After our email correspondence, he suggested I give me a phone call to talk through logistics of the art. His insight into the world of vinyl and arcade graphics is well worth the price. I messed up the first time with my marquee and all it took was a quick email to get a new one. He's super helpful and gives a high quality product. Thanks again! :cheers:
-
Thanks Cilrider...appreciate the feedback and post. I'm here if anyone needs anything. Email is best.
-
Brad,
You still in business? I'm looking for some possible vinyl print work. (The links at the beginning of this post do not come up successfully for me).
-Nick
-
Yes I am...shoot me an email bjbowman045@gmail.com.
-
Still taking orders... bjbowman045@gmail.com. Thanks everyone!
-
Promised I'd post about the graphics I got once I finished our projects and danged if I didn't take a year with all the career junk lol.
Anyhoo I'm a first time cabinet dude so I hadn't really anything to go on. I wanted to build something without a stick and with kiosk style controller arms instead using 8bitdo controllers. I have some kiosk 2.0 arms I'll put on later that look a bit cleaner, and I got 1cm off on the bezel due to a fan cutting short the room my monitor had. Not bad though for a first time try on a retropie bartop. I can cleanup the bezel issues and arms but I wanted to get this up here for folks to look at. As you can tell from all that shine on the cabinet these prints are super glossy and nice. And no their is no graphic blurs on the prints. I have a tremor in my hand so it made the long exposure on the cab shot look slightly off. Tremor is awesome for shmups and rapid fire but not so much for camera lol.
Graphics I got were super high quality durable vinyl stickers. No problem putting them on and they were completely accurate without blemish to what I sent him. Plus we also had vinyl sheets of art printed for a seperate card project. My wife programmed some NFC chips to lay on blank playing cards and we got smash bros graphics printed for each amiibo we were cloning to our NFC cards. End Result was the least space consuming amiibo ever in deck form.
(https://i.imgur.com/wCLHyiC.jpg)(https://i.imgur.com/CwwW0pZ.jpg)
-
Hey all...still printing graphics for the community, let me know what you need. Thanks.
-
Hey all...still printing graphics for the community, let me know what you need. Thanks.
-
Can you also do a something like regular paper print? Basically, something to use as a control panel drill template printout.
-
yes I can
-
Just a reminder, still taking orders but please email me, bjbowman045@gmail.com, PM's don't always go thru for some reason. Thanks for the orders and Merry Christmas everyone.
-
Just updating the thread, still printing. Thanks for those who contacted me.
-
Nice I didn't notice you were in this forum. FYI BYOAC'ers this is where I've gotten my vpin and arcade cabinet graphics printed. Great to work with and nice results.
-
Hey all, made a quick video for trimming graphics when using T-Molding and also how to remove fine scratches when the application process.
https://www.youtube.com/watch?v=z1SUILVp6Mo (https://www.youtube.com/watch?v=z1SUILVp6Mo)
-
Still printing...send me what you need, Thanks :)
-
Still printing for the community, email bjbowman045@gmail.com for a quote, thanks.
-
Been a while since I updated. Still printing for the community, email bjbowman045@gmail.com for a quote, thanks.
Brad
-
I just received my artwork from Brad. Brad is easy to deal with, and the quality of the printing and the quality of the media are fantastic! I could not be happier.
I'll post images once my cab is complete and the artwork is in place.
Thanks again Brad!
-
I just received my artwork from Brad. Brad is easy to deal with, and the quality of the printing and the quality of the media are fantastic! I could not be happier.
I'll post images once my cab is complete and the artwork is in place.
Thanks again Brad!
Your'e very welcome, Thanks for the business!
-
Still printing for the community, email bjbowman045@gmail.com for a quote, thanks.
Brad
-
Still printing for the community, email bjbowman045@gmail.com for a quote, thanks.
Brad
-
Amazing work Brad! Will be reaching out
-
Hey Brad! I just emailed you last night for a quote. Looking forward to hearing from you. Your work looks killer!
-
For everyone who orders thru me please share your experience on the thread. I don't check this thread too often, its all word of mouth.
I'm still printing for the community and will be for a long time, retirement is a ways off. Email bjbowman045@gmail.com for a quote, thanks again for all the orders.
Brad
-
pm sent :cheers:
-
Happy New Year everyone! If you need artwork please email bjbowman045@gmail.com for a quote, thanks again for all the orders.
Brad
-
Got arcade graphics by Lucian045 a while back - top notch work. Quick question, I got some large reverse printed signs done on 1/4" poly. In case I need any in the future, is that something you handle? No rush on the answer, just whenever you see it. Thanks, Marty
-
Yes, you can always call the shop 203-874-2602
bowmansign.com