The NEW Build Your Own Arcade Controls

Main => Audio/Jukebox/MP3 Forum => Topic started by: Surreyjukeboxuser on January 19, 2018, 04:25:20 pm

Title: Ami-Rowe R90 Power Supply
Post by: Surreyjukeboxuser on January 19, 2018, 04:25:20 pm
I purchased an Ami-Rowe R90 when I lived in the USA and used it successfully on USA power.  I have now bought the machine back to the UK with me.  Looking at a manual I have found and also looking at the power supply it would appear that the power supply is automatically dual voltage.  On this basis, I am presuming that I do not need a step down transformer to use it in the UK and the records will also play at the correct speed.  Am I correct in my assumptions?
Title: Re: Ami-Rowe R90 Power Supply
Post by: ami-man on January 23, 2018, 06:30:12 am
Hello surrerjukeboxuser,

I spoke with you yesterday regarding your jukebox and said that you would require a stepdown transformer or a replacement power supply (junction box) and a 50 hz turntable belt pulley.

I await your motor plate arriving and we will supply you with a 240 volt power supply.

Regards
Alan

Alan Hood
ami-man
UK
Title: Re: Ami-Rowe R90 Power Supply
Post by: Surreyjukeboxuser on January 23, 2018, 12:29:39 pm
Alan,

The plate was sent to you today
Title: Re: Ami-Rowe R90 Power Supply
Post by: ami-man on January 29, 2018, 06:06:14 am
Hello Nigel,

Have you recieved the parts? and have these now rectified your problems?

Regards
Alan

Alan Hood
ami-man
UK