The NEW Build Your Own Arcade Controls
Main => Main Forum => Topic started by: Guywiththegun on March 29, 2019, 03:19:24 pm
-
Picture this -
A standup, full size arcade cabinet with a 30" CRT (brand new).
A transparent, LCD bezel
http://crystal-display.com/products/transparent-lcd/ (http://crystal-display.com/products/transparent-lcd/)
LCD marquee
An automatic riser, to bring the cabinet to sitting or standing height.
Voice controls via MyCroft AI (open source Alexa) . . "Hey Dreamcade, play Street Fighter 2".
Programmable LCDs above every button (Switch between "Light, medium, heavy" to "A,B,C" or "Square, Circle, X" . . https://www.digikey.com/product-detail/en/nkk-switches/ISC15ANP4/360-2344-ND/2039171&?gclid=EAIaIQobChMI1OS5kIio4QIVS77ACh1i3AHzEAQYAyABEgLIcPD_BwE (https://www.digikey.com/product-detail/en/nkk-switches/ISC15ANP4/360-2344-ND/2039171&?gclid=EAIaIQobChMI1OS5kIio4QIVS77ACh1i3AHzEAQYAyABEgLIcPD_BwE)
Full RGB illumination
EL Tape T-Molding https://www.t-molding.com/t-molding-illuminated.html (https://www.t-molding.com/t-molding-illuminated.html)
Aaaand screw it . . Let's have an automated dropping 27" LCD in front of the CRT for the new games.
-
(https://uploads.tapatalk-cdn.com/20190329/aca33bf99fd404bf88b484f11c7c3ebe.gif)
-
I figure someone can make some decent money selling a transparent LCD that mounts over a license plate.
-
Someone with oodles of cash would do it.
And then angle the joysticks...
-
Except for the last bit, I don't see why not. I would stop at the riser.