The NEW Build Your Own Arcade Controls
Main => Project Announcements => Topic started by: Firebat138 on February 28, 2021, 10:33:58 am
-
So Finally after Years of being away from the scene.... I finally built my Pincab. Years ago I posted the artwork and build my MAMEGEAR cab back in 2007 and now Im redoing the PC for that one so I may be asking some redundant questions here and there lol.
Specs
50" 4K Playfield
32" BackGlass
15" Topper ( Old Monitor )
PinDMD v3 DMD
Pc Specs nothing spectacular
Ryzen 3
16 Gig Ram
hard drive.. Not big enough lol
AMD Radeon RX 570
Thank you to all the guys on all the sites that helped me through the years. If anyone has any questions on the build lmk
I am currently working on a Racing Cab build but have changed it to a shooter build after I found Time Crisis 5 and all these arcade dumps around OMG. lol
-
Also, I built this one for my brother for his birthday. Same specs, but smaller playfield
Its Called PinCAVE
As on my build, I had a local metal shop Fabricate the Stainless steel top, but this time I had them cut out the Bat symbol
-
:applaud:
Very cool. Digging that bat signal and the artwork on both pins.
:cheers:
-
Very nice job. Did you take any pics along the way? I love reading about how these things get made.
Sent from my iPad using Tapatalk
-
Thanx guys, I sure did... I shall post some after I resize the pics. lol These iphones take crazy high res pics lol
-
Here are some of the starting pics
-
Couple more
-
The vinyl was hard to do, but after a couple tries I got it
-
Are you modeling the cabinet measurements against a real machine? The body looks super huge compared to the backbox. I'd think chopping a few inches off the bottom would look nicer but you waited till it was done to post anything....lol.
-
No way. lol Just built it for our fun and enjoyment. More build pics to come
-
Are you modeling the cabinet measurements against a real machine? The body looks super huge compared to the backbox. I'd think chopping a few inches off the bottom would look nicer but you waited till it was done to post anything....lol.
I had the same issue and all it took to fix was a 1 1/2" spacer between the cab and backbox. You can see what I did here
http://forum.arcadecontrols.com/index.php/topic,160947.0.html (http://forum.arcadecontrols.com/index.php/topic,160947.0.html)
-
I had the same issue and all it took to fix was a 1 1/2" spacer between the cab and backbox. You can see what I did here
http://forum.arcadecontrols.com/index.php/topic,160947.0.html (http://forum.arcadecontrols.com/index.php/topic,160947.0.html)
Yeah I remember yours. I didn't like the final result either but I kept quiet.
-
Don't ever change Gilrock.
-
Nice man, Yeah... again... Built it for my enjoyment. I think it looks great personally as do all the projects here