The NEW Build Your Own Arcade Controls

Main => Wiki Discussion => Topic started by: Arcadenut on March 11, 2016, 01:14:11 am

Title: JAMMA pintout image has an error in it....
Post by: Arcadenut on March 11, 2016, 01:14:11 am
http://wiki.arcadecontrols.com/wiki/JAMMA (http://wiki.arcadecontrols.com/wiki/JAMMA)

The JAMMA pintout has Pins 20 and 21 reversed.

Pin 20 should be LEFT
Pin 21 should be RIGHT

Same for X and Y

Pin X should be LEFT
Pin Y should be RIGHT

[The link above is to the old wiki.  The new wiki page is at http://newwiki.arcadecontrols.com/index.php?title=JAMMA (http://newwiki.arcadecontrols.com/index.php?title=JAMMA). -- Scott]
Title: Re: JAMMA pintout image has an error in it....
Post by: yotsuya on March 11, 2016, 01:19:32 am
He's right!
Title: Re: JAMMA pintout image has an error in it....
Post by: PL1 on March 11, 2016, 02:09:40 am
The JAMMA pintout has Pins 20 and 21 reversed.

Pin 20 should be LEFT
Pin 21 should be RIGHT

Same for X and Y

Pin X should be LEFT
Pin Y should be RIGHT
Thanks for catching that.   :cheers:

Corrected version INW.

I know that the vertical spacing between pins is 0.156", but how much horizontal space do I have for the Pin#/description text?

I'd like to keep the text from hanging over the edge of the connector.


Scott
Title: Re: JAMMA pintout image has an error in it....
Post by: PL1 on March 11, 2016, 05:43:13 am
How's this?

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=149933.0;attach=345241;image)

The .pdf should print to the correct vertical size.

The .zip file contains the .ods (Open Office Data Spreadsheet) file in case you want to change fonts, column widths, etc.


Scott

P.S. You linked to the old wiki.  New wiki page is http://newwiki.arcadecontrols.com/index.php?title=JAMMA (http://newwiki.arcadecontrols.com/index.php?title=JAMMA).
Title: Re: JAMMA pintout image has an error in it....
Post by: Arcadenut on March 11, 2016, 12:31:37 pm
Looks good
Title: Re: JAMMA pintout image has an error in it....
Post by: ed12 on March 11, 2016, 12:49:40 pm
your pin 5 and e ?
both should be -5v
not 12v on on the (pin5)

ed
Title: Re: JAMMA pintout image has an error in it....
Post by: Malenko on March 11, 2016, 01:33:59 pm
your pin 5 and e ?
both should be -5v
not 12v on on the (pin5)

ed

correct
Title: Re: JAMMA pintout image has an error in it....
Post by: PL1 on March 12, 2016, 05:16:38 am
your pin 5 and e ?
both should be -5v
not 12v on on the (pin5)

ed

correct
Not sure how that happened.   :dizzy:

Nice catch, guys.   :cheers:

Fixed and re-upped.   ;D


Scott