| Main > Main Forum |
| What cab is this? Cocktail! |
| << < (3/4) > >> |
| Kevin Mullins:
Looks like a standard 44 pin. Does it look to have a color or black/white monitor in it ? |
| slapaham:
Can't tell if I'm honest... I'm swayed to say a black and white but have no reason to say that... just a feeling... I'll count the pins - I'm sure it's smaller than jamma... |
| Kevin Mullins:
DEFINITELY smaller than JAMMA and no where near the same pinout. Look to see if there are like 5 or 6 wires coming off that harness going to the monitor. (not counting the main power) Like a RED, GREEN, BLUE, BLACK, WHITE |
| slapaham:
The colours mentioned are definitely coming off the monitor... does that mean it's colour? Be nice if it did? I was looking on the web and saw this - http://www.jammaboards.com/store/jamma-pcb-to-pacman-cabinet-adapter/prod_273.html You were right... it's a 44pin (one of the cables has come loose so I'll have to resolder it)... would this adaptor be suitable? I would have to obviously opt for the ATX PSU as well... Thanks for the info so far! :cheers: |
| Kevin Mullins:
You'll need to figure out the wiring pinout on your connector before you can just jump up and buy an adapter. i.e. - What's the wiring pinout for "UFO" ? A Pac-Man adapter may be 44 pins and "fit", but it may not be wired the same. |
| Navigation |
| Message Index |
| Next page |
| Previous page |