Main > Main Forum
aimtrak help
ant2:
Some questions i hope some one can help me with :)
1. I have enabled light gun=1 lightgun=mouse dualguns=1 in the mame config
the first gun seems to work fine now..
but when im in game it appears the second gun is allocated the same device (mouse) is there anyway to get it load as a separate device?
2. do i need to change any axis data within the game configuration as with alien3 i couldnt get it to register the input at all, if i say select an axis it always comes up with "mouse X"
3. is there anyway to get the x and y axis working with the aimtrak game controller option rather than a mouse, the reason i ask is because my pc games - house of the dead/virtua cop etc (the m2 emulator stutters on my machine) will only allow me to allocate one mouse (i.e player1) if i allocate the game pad to controller 2 the x+y axis dont seem to work - i also tested this from the game controllers section in windows.
4. is there any way to calibrate the gun within mame itself
thanks you :)
ant
Drakin:
1) in the Aimtrak utility did you make the second gun device 2?
2) the Aimtrak is seen as a mouse and you have to configure your X and Y in mame (by "tabing" into mame) X axis is left and right, Y axis is up and down.
3) not sure what to do there
4) You can calibrate in mame as long as you didn't dissable the calibration in the Aimtrak utility....you should be able to initiate the calibration by holdint the trigger down for 5 or more seconds.
Hope this helps
The pic below I have player one configured.
This is the configuration from the Aimtrak utility.
ant2:
thanks for your reply
1) yes, but for some reason it still says mouse1 for both? - ive enabled lightgun_dual .. is there anything else i should do? your example shows "gun2" under both light gun X and light gun x2 does this still work even though the name would suggest its the same device ? :)
2) if i select this option to enter a key it always comes up with "mouse x" even when i point the gun from off screen to up i cant get it to list Y
3) how do you guys play pc games hotd etc? or do you just use the m2 emulator? what about psx how do you get the second gun to be recognised?
4) ok thanks
Drakin:
Here is a copy of my MAME INI.
#
# CORE INPUT OPTIONS
#
coin_lockout 1
ctrlr
mouse 1
joystick 1
lightgun 1
multikeyboard 1
multimouse 1
steadykey 0
offscreen_reload 0
joystick_map auto
joystick_deadzone 0.3
joystick_saturation 0.85
Maybe that will help.
ant2:
ok so i set the following:
mouse 1
multimouse 1
which werent set, but i still cant get the second gun to work - is there something i am missing as gun2 keeps coming up as mouse 1 still...
re setting up analog x+y how was this done? soon as i select a key to enter and move the gun up and down it will automatically put mouse X .. never Y
help please : )