Main > Main Forum
How To Best Hook Up a Guncon 2 To My Setup? Please Help!
DJ_Izumi:
--- Quote from: Ginsu Victim on January 20, 2010, 11:05:55 am ---They are working on one, but installing the aimtrak is VERY easy.
--- End quote ---
Now if only more of you would mail me your Guncon guts after canibalizing them, I could repair some actual guncons. :P
Ginsu Victim:
--- Quote from: DJ_Izumi on January 20, 2010, 11:17:50 am ---
--- Quote from: Ginsu Victim on January 20, 2010, 11:05:55 am ---They are working on one, but installing the aimtrak is VERY easy.
--- End quote ---
Now if only more of you would mail me your Guncon guts after canibalizing them, I could repair some actualy guncons. :P
--- End quote ---
I killed a SNES Justifier for mine.
Dazz:
--- Quote from: DJ_Izumi on January 20, 2010, 11:17:50 am ---
--- Quote from: Ginsu Victim on January 20, 2010, 11:05:55 am ---They are working on one, but installing the aimtrak is VERY easy.
--- End quote ---
Now if only more of you would mail me your Guncon guts after canibalizing them, I could repair some actual guncons. :P
--- End quote ---
There isn't really much of the guts left over as most of them are used along with the Aimtrak. All that I've had left over is the barrels with the lens and the actual sensor that's cut off the main board to allow the Aimtrak to fit. Everything else contains the buttons and wires from the Aimtrak are soldered to the existing button pads.
DJ_Izumi:
--- Quote from: Dazz on January 20, 2010, 01:47:34 pm ---There isn't really much of the guts left over as most of them are used along with the Aimtrak. All that I've had left over is the barrels with the lens and the actual sensor that's cut off the main board to allow the Aimtrak to fit. Everything else contains the buttons and wires from the Aimtrak are soldered to the existing button pads.
--- End quote ---
One of my Guncon 1s has a fray somewhere in the video passthough cable, a fray that seems to be INSIDE the PlayStation connector port. It really can't be disassembled there to repair. The cables from a gutten Guncon would get this gun back in operation just fine. :)