| Main > Main Forum |
| Aim Trak reloading |
| << < (2/2) |
| gman314:
Also, is it possible to mount to LED sensor in the "horizontal" position, but upside down? The LEDs, of course, would be angled towards the PCB camera. I was thinking of mounting it ouside my plexi and bezel, and attaching it to the underside of the marquee area. Also, northerngames, what kind of paint did you use? I rather have a black realistic looking gun than a bright orange one. |
| Drakin:
krylon fusion is the paint I had used, Made for plastic and works really good!! |
| Dazz:
--- Quote from: gman314 on January 18, 2010, 11:52:12 am ---If I use the Guncon2, I think that I also will paint it (the bright orange is not going to work for me). What is the best kind of paint to use? Standard modeling paint? Also how exactly do you wire buttons to the P1, P2, ...P5 on the gun sensor PCB? Do you have to solder the wires on to it? The included wiring harness seems like it connects just to the trigger and aux pins. --- End quote --- Check this post out on the HyperSpin forums that I did. I used a Guncon 2 and wired all the buttons up except for the 2 start/select buttons on the gun. Pardon he paint as this was just a test gun. My 2 newer guns look much better painted. I used Krylon for the on in this pic and it seems to scratch and come off fairly easy. On my 2 new guns I used Vinyl spray dye that I someone here in the other thread recommended. Looks much better, but the trigger still doesn't paint well. :( |
| Drakin:
Dazz, did you use steelwool on the guns first?...I havent had any probs yet with the krylon fusion...and yea the trigger is the worst! |
| Navigation |
| Message Index |
| Previous page |