Main > Lightguns

lightgun lcd top gun change position in mame (mouse1 or mouse3)

<< < (2/2)

Queeg:
What you could do is just save multiple inputs.... Mame is capable of saving many different buttons/axis per input. So for each game configure it for whatever mouse it is detected as. Then reboot and when it is detected as another mouse, save those settings in addition to the other input already saved instead of overwriting. Do the same thing for the third mouse. This would of course mean the gun could be controlled by another device but you probably won't be using those in conjunction with the gun anyways.

bkenobi:
You can try plugging the USB devices into different hubs (some motherboards actually have multiple hubs onboard, so you don't necessarily need physical hubs).  This has been used in the past, but there may be better solutions at this point.   :dunno

Popcorrin:

--- Quote from: Queeg on January 12, 2010, 01:26:24 am ---What you could do is just save multiple inputs.... Mame is capable of saving many different buttons/axis per input. So for each game configure it for whatever mouse it is detected as. Then reboot and when it is detected as another mouse, save those settings in addition to the other input already saved instead of overwriting. Do the same thing for the third mouse. This would of course mean the gun could be controlled by another device but you probably won't be using those in conjunction with the gun anyways.

--- End quote ---

Yes, I think this would work if you didn't require simultaneous multiple mouse input.  It doesn't work with my setup though since I am using two guns.

Navigation

[0] Message Index

[*] Previous page