| Main > Main Forum |
| Questions - IPAC/MiniPac wiring, U360 issue, and pinball |
| (1/1) |
| spOOf:
Hey gang, My cabinet is really coming along, thanks to much help here and by trusty Project Arcade book. I have a few questions as I wire up my control panel... 1. I have an 8-button layout and a minipac. What is the optimal way to wire this. I started doing it and then tried playing Street Fighter. My buttons seemed off. Could someone matchup the standard switch(SW) wiring pattern for me? I went top - 1,2,3,4 & bottom 5,6,7,8 - but that seems wrong. Should it go top odds, bottom evens? Maybe 1237, 4568? TopRed SW1 TopYellow ? TopGreen ? TopBlue ? BotRed ? BotYellow ? BotGreen ? BotBlue ? 2. I swapped in the long handle for my U360, attached to panel and plugged it in. When I started playing, I'm off 90 degrees (up moves right, right moves down, etc). Did I screw up here? If so, what's the best way to fix it. I haven't wired anything for player 2 yet, waiting until I get player 1 right (and some parts come in). 3. How do you guys wire up your pinball buttons? I currently will just have right/left flipper and right/left nudge. Thanks for the assist! :cheers: |
| Ginsu Victim:
--- Quote from: spOOf on November 25, 2009, 10:34:36 am ---1. I have an 8-button layout and a minipac. What is the optimal way to wire this. I started doing it and then tried playing Street Fighter. My buttons seemed off. Could someone matchup the standard switch(SW) wiring pattern for me? I went top - 1,2,3,4 & bottom 5,6,7,8 - but that seems wrong. Should it go top odds, bottom evens? Maybe 1237, 4568? --- End quote --- Yeah, I'd say 1237 4568 --- Quote ---2. I swapped in the long handle for my U360, attached to panel and plugged it in. When I started playing, I'm off 90 degrees (up moves right, right moves down, etc). Did I screw up here? If so, what's the best way to fix it. --- End quote --- You can just reattach the PCB to face the correct direction. |
| Navigation |
| Message Index |