| Main > Main Forum |
| New Acquisition: Hyper Sports!! |
| << < (2/2) |
| IG-88:
Saint if you see this you may as well move it over to the restore thread, guess thats what this is turning into ;D Got a few things done on this today. Yanked the old t-mold and noticed that there was a bit of swelling. The wood is pretty weak in a few spots. Going to try some glue and clamps to see if I can strengthen it up otherwise I'll just cut out and replace it. Whoever repainted this did a piss poor job. Inside the bezel area is all peeling and flaking. I'm not sure how to remove this stuff. I scaped off all the loose stuff and rand a palm sander over it a little. I may try paint remover to see if that will make a better base coat for the yellow I plan to put back on it. Also filled in a rather large gouge in the top near the vent. Not quite sure how the heck that got there, but an easy fix. |
| IG-88:
more pics |
| IG-88:
I realize mine is actually a Track & Field cab but this is what I'd like it too look like when I'm done. May even add a PC with mame and T&F and 88' games also. If I can get it to switch back and forth easily. Might be easier to use real PCB's tho.. |
| DillonFoulds:
I thought Hyper Sports was just a modified Track and Field anyways? Same cab' different artwork. Same game, different events :P |
| IG-88:
From what I've heard, some were dedicated. I know my coin door is different than the one pictured. It's not an "over and under". |
| Navigation |
| Message Index |
| Previous page |