Main > Monitor/Video Forum
Purchasing Arcade monitors.
RejectedManiac:
Sure will. I'll do a follow up.
vatkru:
Below are the specs of the monitor sold by Bellabs. Does anyone foresee any issues with such a monitor to replace the one in a Dynamo HS5 used for Street Fighter II?
[CRTM] 25" CRT Monitor, 31Hz, Curved, CGA, MONOsync™
CGA Mono-Resolution V-Freq. 31 Hz
Adjustment Controls: Brightness, Contrast, H-Size, H Position, V-Size, V-Pos.
Sync: 6-pin CGA (R, G, B, GND, H+V, V) connector
100~240 VAC, 50/60 Hz no isolation transformer needed
Available in Universal mounting frames
RejectedManiac:
Here is the follow up video. (Not good at making videos)
The packaging was great. They had cardboard on every side of the inside box as well as the foam you see. On the top where they have the chassis they had the huge bubble wrap and cardboard on top of that.
Make sure to clean up the monitor after you put it in the cabinet. Very minimal dirt is there but a tiny bit of glue was left behind from the protective plastic. It's a perfect fit with my bezel. Couldn't be happier! I've included a few pics.
The picture of the monitor AFTER I fixed the ground issue on my PS. Get them while they got 'em! ;D :applaud:
vatkru:
Thanks for the info and video :applaud:
RejectedManiac:
No problem at all!