| Main > Main Forum |
| Plexi and stuff |
| << < (2/2) |
| Donpatchi:
When you want to do a bottom mounting without the screws beeing vissible i suppose you need an S plate (see pic)? This would certainly be alot more simple then what i intended to do but i remember reading that this is not as solid as a top mounting. Well here is the link to what i am refering to http://www.slagcoin.com/joystick/mounting_layering.html |
| Neverending Project:
That is a nice, clean solution. You would just need to make sure the mounting screws are long enough to get a couple of threads buried in the wood, but short enough that they don't poke through. Another solution (what I did) is to use T-nuts from the top. Drill a hole for the nut to fit through, and a larger hole just deep enough to recess the flange. Then fill the top with bondo or wood putty. The screws thread in from underneath. |
| Franco B:
I did a JLF top mounting guide [here] if it helps. |
| Navigation |
| Message Index |
| Previous page |