| Main > Main Forum |
| Where to buy the electrical (pc like) power plugins for cabinet back? |
| << < (2/3) > >> |
| MonMotha:
In the USA, those are commonly referred to as "IEC plugs" since they are (one of many) plugs standardized in an IEC standard. A "power entry module" or "power entry connector" should get you lots of hits. You can even get them with built in noise filters, fuse holders, power switches, etc. |
| Hoopz:
This question popped up a few years ago and someone got quite worked up when the OP said they couldn't find them anywhere. They simply pointed out that you could find them on the back of any old pc laying around.... :) |
| Blanka:
I would not recommend using them. Normally aparatus with IEC inlets need to be tested. The back of the plug has open AC current clamps that can be easily touched. It can even void your home insurance in case of fire caused by the cab. I would recommend leaving all components as they are build and use regular power bricks to connect the stuff. How often do you plan to detach cords anyway? |
| Avinitlarge:
Ive just replaced mine. Pulled it from a knacked ATX PS |
| MaximRecoil:
--- Quote from: Blanka on September 23, 2009, 03:14:32 pm ---I would not recommend using them. Normally aparatus with IEC inlets need to be tested. The back of the plug has open AC current clamps that can be easily touched. It can even void your home insurance in case of fire caused by the cab. I would recommend leaving all components as they are build and use regular power bricks to connect the stuff. How often do you plan to detach cords anyway? --- End quote --- You can find open AC current all through a typical arcade machine; open fuse holders for example, like these - link. Either way, you could use heat shrink tubing or whatever over the open terminals on the back of an IEC power connector if it is a concern. |
| Navigation |
| Message Index |
| Next page |
| Previous page |