| Main > Main Forum |
| Jamma cabinet how do i hook up stereo sound? |
| << < (3/5) > >> |
| TrAb:
Im now thinking about installing a pair of computer speakers of some kind, the speakers that are in the cabinet are acually pretty ---smurfy--- :( |
| Kevin Mullins:
Ok..... once I saved your pics I could read the amp labeling a little clearer. The two little connectors on the right side that only has two wires each are clearly labeled SPK1 and SPK2. (Red/Black wires, White/Black wires) So those should be the outputs going directly to the speakers themselves. The Red/White wires on the larger connector should be coming from the volume control. Now what you need to know is what else leads INTO the volume control ? The input and output of the volume control are on that CN2 connector by the volume knob. L_OUT and R_OUT should be the Red/White wires. You need to find the wires that go to the L_IN and R_IN and then follow those to where they come from and show us what you have there. Did this cabinet come with a game installed in it or is just just sold as a basic JAMMA cabinet? |
| TrAb:
Its was just sold as basic jamma cab no game. I took the speaker covers off last night and there is only one regular speaker in each side, there is a hole and wires for a tweeter but it was never installed? I looked at those wires and they are the same red/white in color and i believe that lead to the jamma harness? |
| TrAb:
Im going to get a voltage tester and see what its getting exactly tonight. Maybe its not getting enough power? |
| Kevin Mullins:
--- Quote from: TrAb on September 22, 2009, 07:14:35 am ---I looked at those wires and they are the same red/white in color and i believe that lead to the jamma harness? --- End quote --- Just on the JAMMA harness there will be only two wires for audio..... One is the + (pin 10 on the parts side) One is the - (pin L on the solder side) (this is mono) So if you are trying to connect RCA style cables into that then the shield for both cables will go to the - wire ....... and the main conductor for both cables will go to the + wire. But you need to verify exactly how the cabinet is wired FROM the amp TO the JAMMA harness first. Since it appears to be a stereo amp, but JAMMA is mono..... I would think that the two Red/White wires going from the amp to the JAMMA harness would be tied together somewhere. This is what I'm trying to verify. |
| Navigation |
| Message Index |
| Next page |
| Previous page |