Main > Main Forum
How to remove buttons
(1/2) > >>
Avinitlarge:
How do I remove my buttons? The locking ring/nut winds all the way to the white plastic piece that holds the micro switch but cant go any further. Any suggestions. I imagine its easy when you know how

Turnarcades:
Allbutton nuts should go straight over the switch holder section once the switch is taken off - howelse do you suppose it got on there in the first place? If it's stuck it could be the thread is chewed, worn or filled with dust and grease. Give it some elbow, and a pushbutton wrench may help. Failing that, some wide-grip pliers.
Kevin Mullins:
That's a lampholder in the way....... PULL it out first.
Swatwolf:
Plumbers Wrench or wide gripped pliers would be the best, of course it will damage some plastic a bit when doing this but it should still work.
Ginsu Victim:
Like Kev said, that's a lampholder. Remove the switch, then twist the lampholder counter-clockwise. After that, you can remove the nut.
Navigation
Message Index
Next page

Go to full version