Main > Lightguns

Its Here: Ultimarc AimTrak Light Gun Module

<< < (136/143) > >>

ratsflif:
I received my pair of aimtraks about 2 weeks ago and have been playing around with them here and there.  I can say that these are much better than the LCD Topguns, I had a pair of those and was really disappointed.  The aimtraks are working great, it took some playing around with but I have both guns dialed in pretty well.  I have them setup on a Naomi Universal cab with a 29" vga monitor, with the LCD topguns I would have to be in another room for them to work on a screen that size, with the aimtraks I stand about 3' back and can play area 51, timecrisis, police trainer without the crosshairs, as well as virtua cop 1 and 2 on the model 2 emulator.  For the games with positional guns like T2 and Alien3 you can stand even closer.  Since my monitor is VGA I am running everything at 640x480, I was having all kinds of problems until I turned triplebuffering off for the gun games.  Here is a quick pic, I installed them in some Guncon2s that I picked up for $10; you can see the leds glowing, I mounted the board under the bezel and bent them to point down to the guns.

phildo77:

--- Quote from: MK3FAN on April 15, 2010, 10:47:08 pm ---The first LED rail that I received was faulty. The replacement worked perfectly. Many thanks Andy. Here it is in action....


--- End quote ---

Phenomenal.  That's what I needed to see.  Mine are on the way!   ;D

Reckless:
Hello folks,

got a prob while calibratring my aim trak:

I upgraded to fw1.3. Now I am holding the trigger 5 secs to go into calibration mode.

upper left works fine and upper right to,
but when my mouse coursor points at the lower middle I can aim wherever I want and press the trigger as often as I want but I cant get the calkibration process done!

When I am pressing the triger the coursor moves back to its initial location from where it moves down again which means the button press is registred but thats all.

Is this a known prob?

Dannymh:
This is only a guess, but the camera probably can't see the LED bar properly when you are pointing at the bottom. Make sure the camera is aimed up and the LED bar down.

Check the line of site

helpmebuild:
Andy,

What are we looking at in terms of time for the completed units (shell and all), a week, a month? I'm just looking for a general idea so I can decide if its best to wait or just cave and DIY with a Guncon or something.

Thanks!

Navigation

[0] Message Index

[#] Next page

[*] Previous page