Main > Project Announcements

First MAME Cab - Spider-Man (Updated: August 13, 2010)

<< < (6/8) > >>

Malenko:

--- Quote from: DillonFoulds on November 27, 2009, 08:58:45 pm ---NBA Jam or NBA Jam Tournament Edition? I think the non-TE was 2-player, if that matters.

--- End quote ---

nah, all NBA Jams were 4 player from the factory TE was just a rom update that updated teams n stuff.

no pix tonight, too busy. Im still following along, its got tons of potential!

newtrix:
If your girlfriend is still around I nominate her for girlfriend of the year!!!

bjordan314:
Spiderman
Guide Spider-Man, Black-Cat, Hawkeye and or Sub-Mariner as they punch and kick their way through four chapters worth of Dr. Dooms villains. This game is in very nice shape and has a rebuilt monitor....

Manufacture: Sega
Year: 1991 Price:

DillonFoulds:
YES! That's it! Gotta be! Thanks bjordan314!

Kind of haven't had much updates for my cabinet.

Loaded up hyperspin and most of the roms and emulators for legacy consoles (Minus SNES, which everyone seems to want the most  :angry:).

Still trying to get a plan together for the new 4p control box...

And I ended up picking up a cocktail on the weekend. This WILL be my last purchase until they're both done. After this, I'm gonna hold out till I can get a pinball machine.

DillonFoulds:
Figured I'd give this a BUMP.

Snow is almost all melted in the yard, the brick patio is dry as a bone, but I don't want to paint on there, so I'm gonna have to keep waiting for the grass to dry up and the ground to finish thawing out... WON'T BE LONG NOW!!

i guess to pick up where I left off...

TO DO LIST:
- Cut some handles in the bottom. Not concerned about mice, and we don't have rats in Alberta. It's gonna make taking it upstairs a LOT easier!
- Sand and repaint the cab. I picked up some bondo so I can hopefully fill in some of the nicks and chunks missing.
- Sand and repaint the coin door. There's no rust or anything, it's in great shape, but there's some "technicolor" paint on it from the previous job.
- New control box. Going to pull out the GPWiz40-Eco in favour of an I-PAC4. There's just no enough inputs on the GPWiz for what I have in mind :(
- Replace the T-Molding. Gotta decide on a color. Probably going to go with red, as that's what is already there, and it looks fine.
- Center the monitor. It's a bit off so the bezel doesn't sit -just- right. There's a couple gaps.
- Remount the power strip.
- Artwork - Sides and marquee.
- Nitpick about more things to redo.

Navigation

[0] Message Index

[#] Next page

[*] Previous page