| Main > Main Forum |
| Coin Door Help? |
| << < (2/8) > >> |
| bkenobi:
Get Rustoleum hammered finish if you want to get that dimpled look back. If you don't care, a standard spray will work fine. |
| spacies:
--- Quote from: bkenobi on August 29, 2009, 09:33:08 pm ---Get Rustoleum hammered finish if you want to get that dimpled look back. If you don't care, a standard spray will work fine. --- End quote --- +1 on the hammer finish paint. Its really good for coin doors etc |
| bradx:
--- Quote from: mvsfan on August 29, 2009, 07:53:49 pm ---thats a waste of a usb port although you could do it if you want to. It could very well mean the difference between adding a hub or not depending on your MOBO I havent heard of any coin door Lights yet that are powered by 6VDC. Their either 5V or 12V. --- End quote --- yeah, it was a 5V bulb but i already had the wall wart just sitting there and it was the closest to the voltage i needed. the first one i tried was 12V, wow did that make those mothers light up bright!!! |
| Avinitlarge:
I would sand or bead blast the coin door. It leaves a good surface to repaint. I have access to a blasting cabinet which makes life easier. |
| Encryptor:
I took mine to a powder coating place. They blasted it and used a wrinkle finish powder coat on it. I also had them do the coin chutes. The color for the coin chute was called chrome but it looks silver. I think the door looks pretty decent though. Encryptor |
| Navigation |
| Message Index |
| Next page |
| Previous page |