Main > Main Forum
Logitech precision for hacking?
<< < (4/5) > >>
endrien:

--- Quote from: miles2912 on August 25, 2009, 03:42:52 pm ---On a standard pc molex connector one rail is 12v and the other 5v. 

--- End quote ---
I'm using a laptop....

--- Quote ---I did one of these.... let me rephrase... I ATTEMPTED to do one of these as my first hack ever and it was a chore. I didnt know that the grounds were different for several of the inputs so I had quite a mess.

I highly reccomend a game pad that GGG sells... or a cheapo one from Deal Extreme if you can wait 2 weeks. There are pics/instructions around here. The GGG one is a single ground for all inputs. very nice.

joe
--- End quote ---

The Logitech pad is fairly easy if you know your stuff, I traced the buttons to there easier to solder counterparts and some of the buttons DO share a common ground. Alot of it is following traces.

Beretta:
you can tap usb for 5v
endrien:
Ahh I should have thought of that. I need a way to power the coin door lights as well......
Beretta:
can draw about 500ma ( or 1/2 amp) from usb, i dunno if that would be enough for everything.

if you switch the coin door lights over to LED you should be ok.

otherwise im not sure.
endrien:
Would they blow if I ran them off outlet power alongside my marquee light?
Navigation
Message Index
Next page
Previous page

Go to full version