Main > Main Forum

Dual arcade monitors, please help!!

Pages: << < (6/6)

discgolfer72:

i have used a combo  of soft 15 k  and quick res to output to a arcade monitor without blowing cash on an uneeded arcade vga card

it seems that you problem is from trying to use the arcade vga card  drivers and the ati control center to enable mutiple displays id pawn  off the arcadevga on someone and go pick up a cheapo  nvidia graffix card with dual  outputs
then use soft 15k  and  quick res
quick res will  bybass windows  limit in 800x600  and soft 15 k will allow your card to run at 15 hz
i have bolth files if you cant find them



the ati control center is a pos config app  it sucks  even when trying to configure mutiple pc displays so i can understand having trouble with 2 cga monitors

at the verry least   setup  your one working monitor  then run quick res  then install the second monitor this should allow you to use the windows utility to adjust your settings instead of the craptasitc ati catylist tools

MaximRecoil:

Are both ports on the AVGA 15 KHz? Last I knew, the lower port was 15 KHz while the upper port was for the higher PC resolutions. Maybe that has changed with newer cards.

tommyinajar:


--- Quote from: Kevin Mullins on August 24, 2009, 11:59:14 am ---
--- Quote from: GaryMcT on August 24, 2009, 11:32:08 am ---Try uninstalling the display driver, rebooting, and reinstalling the display driver.

--- End quote ---

Be sure to uninstall ANY other display drivers and install ONLY the ArcadeVGA drivers and software.

Also verify that you are not trying to run a resolution that one or the other monitors isn't truly capable of.

--- End quote ---
You might also try Driver Cleaner or ATI cleaner- to make sure you get ALL the incorrect drivers out.

I swear ATI drivers are the absolute worst.

Pages: << < (6/6)

Go to full version