Main > Main Forum

Control Interface

Pages: (1/2) > >>

Avinitlarge:

I have a jamma cabinet but im not sure which control interface to use. At 1st I was thinking about the I-PAC but then started to think about the J-PAC. Any advise??

Beretta:

well the jpac will let you use the jamma harness.. on the other hand if you want more then 3 buttons per player you need to run extra wires for those buttons..

personally i'd rather go with the i-pac.. saving the jamma harness is really very low on priorities for me.. it's not like it's a great deal of work to rereun your own wires and it'll probably look better anyway.

besides screw terminals are a lot more reliable then a edge connector like a jamma.

j-pac would be good imo if you wanted to take a hands off approach on the cab.. or wanted to be able to also run jamma boards on it..

but that also means leaving the power supply in there.

this is a personal prefrence but if it's gonna be a mame cab then make it a mame cab, ditch the jamma wiring and start fresh with a i-pac.. jpac is more expensive anyway.

Avinitlarge:

I like doing wiring. I-PAC it is then

drventure:

Go I-pac. Those things are awesome!

divemaster127:

If you are in the US I stock the ipac's if in europe I would order direct from andy its cheaper
dm

Pages: (1/2) > >>

Go to full version