| Main > Main Forum |
| Control Interface |
| (1/2) > >> |
| Avinitlarge:
I have a jamma cabinet but im not sure which control interface to use. At 1st I was thinking about the I-PAC but then started to think about the J-PAC. Any advise?? |
| Beretta:
well the jpac will let you use the jamma harness.. on the other hand if you want more then 3 buttons per player you need to run extra wires for those buttons.. personally i'd rather go with the i-pac.. saving the jamma harness is really very low on priorities for me.. it's not like it's a great deal of work to rereun your own wires and it'll probably look better anyway. besides screw terminals are a lot more reliable then a edge connector like a jamma. j-pac would be good imo if you wanted to take a hands off approach on the cab.. or wanted to be able to also run jamma boards on it.. but that also means leaving the power supply in there. this is a personal prefrence but if it's gonna be a mame cab then make it a mame cab, ditch the jamma wiring and start fresh with a i-pac.. jpac is more expensive anyway. |
| Avinitlarge:
I like doing wiring. I-PAC it is then |
| drventure:
Go I-pac. Those things are awesome! |
| divemaster127:
If you are in the US I stock the ipac's if in europe I would order direct from andy its cheaper dm |
| Navigation |
| Message Index |
| Next page |