| Main > Main Forum |
| help what encoder works with pot based controls |
| << < (2/2) |
| discgolfer72:
nither of thoes links work for me i see the specs on the full u-hid but i am only needing the 8 pin version so if you could explain the specs and avail inputs on it as the websit does not really go in depth on the 8 pin version only the full u-hid device |
| u_rebelscum:
Links work for me. Are you accessing from work, that has some web limiting policy? edit: I couldn't reach the site for a short while, but is back up again. The nano is basically a normal u-hid, except with only 8 input/output pins (+1 a ground pin), vs the u-hid's 50 connection pins. Each of the 8 nano's pins can be individually assigned to analog joystick, joystickk button, keyboard key, mouse button, mouse axis, LED (output), or +5v (output). Each analog axis needs one pin, plus a +5v source, which can be either another (shared) pin or an external source. Each button needs one pin, plus the (shared) ground pin. So: 2 analog axes pins, + 4 digital pins + 1 +5v pin = 7 pins. You still have at least one more free pin, and two if you get the power from somewhere else.. |
| discgolfer72:
cool thanks for the clarification looks like it will work then without any more need encoders ( 2 pots up/down,left/ right , start ,shift,photon torpedo) |
| Navigation |
| Message Index |
| Previous page |