Main > Reviews

GroovyGameGear Micro-Leaf switches

<< < (6/6)

Ginsu Victim:
Have you tried stretching your springs slightly?

RandyT:

The holders position the actuators so that they have a "hair trigger".  This puts the actuation at a known point in the stroke, so rapid fire is a lot easier than if it's buried half way through.  But you can tweak this by simply bending the metal leaf slightly.

Ginsu Victim's advice is also good, but don't stretch the springs too far until you know you really want to.  You can always stretch them a little more, but going back is almost impossible.

RandyT

Ginsu Victim:

--- Quote from: RandyT on October 19, 2009, 03:12:33 pm ---Ginsu Victim's advice is also good, but don't stretch the springs too far until you know you really want to.  You can always stretch them a little more, but going back is almost impossible.

--- End quote ---

Hence my use of the word "slightly".

isucamper:
hmm.  if it's still bugging me after a suitable break in period, I may try some of this advice.

Navigation

[0] Message Index

[*] Previous page