Main > Monitor/Video Forum
Mouser Cap Lists
SirPeale:
DO NOT USE THIS LIST. There are discrepancies.
Updated the 4900 list above.
Location Voltage Value Notes?
C201 25 1000 Bumped up voltage from 16 to 25 647-UVZ1E102MPD
C205 16 470 647-UHE1C471MPD
C301 50 330 647-UVZ1H331MPD
C303 50 3.3 647-UVZ1H3R3MDD1TD
C308 50 3.3 647-UVZ1H3R3MDD1TD
C310 160 10 Bumped up voltage from 100 to 160 647-UVZ2C100MPD
C311 160 10 647-UVZ2C100MPD
C313 200 47 Bumped up voltage from 160 to 200 667-EEU-EB2D470
C315 50 1 667-ECE-A1HKG010
C351 50 1 667-ECE-A1HKG010
C352 25 47 647-UPM1E470MED1TD
C354 25 47 647-UPM1E470MED1TD
C366 25 22 647-UVZ1E220MDD
C505 200 560 661-EKMQ201VN561MP30
C506 160 22 661-EKXG161ETD220MJ2
C507 200 47 Bumped up voltage from 160 to 200 667-EEU-EB2D470
C701 25 1000 647-UVZ1E102MPD
C702 160 10 Bumped up voltage from 100 to 160 647-UVZ2C100MPD
SirPeale:
Updated the K7000 list above.
Location Voltage Value Notes?
C4 63 10uf NP Bumped up from 25V
C5 63 10uf NP Bumped up from 25V
C6 63 10uf NP Bumped up from 25V
C10 16 33uf Bumped up to 25 from 16V
C11 25 22uf
C12 50 1uf
C13 25 22uf
C18 50 1uf
C20 25 10uf
C21 25 10uf
C22 50 1uf
C23 25 47uf
C42 25 1000uf Bumped up to 25 from 16V
C45 16 470uf Bumped up to 25 from 16V
C46 16 470uf Bumped up to 25 from 16V
C48 35 100uf
C50 25 1000uf
C55 200 560uf
C56 160 22uf
C57 200 47uf
guppy:
--- Quote from: SirPeale on June 23, 2010, 09:53:19 pm ---Updated the 4900 list above.
Location Voltage Value Notes?
C201 25 1000 Bumped up voltage from 16 to 25 647-UVZ1E102MPD
C205 16 470 647-UHE1C471MPD
C301 50 330 647-UVZ1H331MPD
C303 50 3.3 647-UVZ1H3R3MDD1TD
C308 50 3.3 647-UVZ1H3R3MDD1TD
C310 160 10 Bumped up voltage from 100 to 160 647-UVZ2C100MPD
C311 160 10 647-UVZ2C100MPD
C313 200 47 Bumped up voltage from 160 to 200 667-EEU-EB2D470
C315 50 1 667-ECE-A1HKG010
C351 50 1 667-ECE-A1HKG010
C352 25 47 647-UPM1E470MED1TD
C354 25 47 647-UPM1E470MED1TD
C366 25 22 647-UVZ1E220MDD
C505 200 560 661-EKMQ201VN561MP30
C506 160 22 661-EKXG161ETD220MJ2
C507 200 47 Bumped up voltage from 160 to 200 667-EEU-EB2D470
C701 25 1000 647-UVZ1E102MPD
C702 160 10 Bumped up voltage from 100 to 160 647-UVZ2C100MPD
--- End quote ---
I ordered and installed this kit (I used your mouser project list) on my 19K4952 Wells-Garner . The C505 cap (mouser# 661-EKMQ201VN561MP30) is physically much smaller than the original cap. Therefore the heavy pins on the mouser cap will not align to the holes in the pcb. The pins on the mouser cap are les than 1/4" long, so there is no bending possible. I ended up just not using it at all. This single cap is also the most expensive in the kit ($2.13).
BTW, My monitor looks great now. Thanks
SirPeale:
--- Quote from: guppy on June 30, 2010, 01:40:51 pm ---I ordered and installed this kit (I used your mouser project list) on my 19K4952 Wells-Garner . The C505 cap (mouser# 661-EKMQ201VN561MP30) is physically much smaller than the original cap. Therefore the heavy pins on the mouser cap will not align to the holes in the pcb. The pins on the mouser cap are les than 1/4" long, so there is no bending possible. I ended up just not using it at all. This single cap is also the most expensive in the kit ($2.13).
BTW, My monitor looks great now. Thanks
--- End quote ---
You can modify the chassis slightly to accommodate this cap. Drill a small hole where you want the lead to go.
Or on some chassis there is a hole directly below this cap. You can use that for the opposite lead, then solder in a jumper to make the connection.
Unfortunately (or fortunately, depending on how you look at it) technology takes leaps and bounds, and leaves its older brethren high-and-dry for a lack of replacement parts. Or the parts are there, but a different size.
Ken Layton:
Since all the XICON brand caps are discontinued, the new LELON brand has super long part numbers. Makes ordering more of a challenge now. I just placed a Mouser order last Sunday. Took the better part of two hours trying to find the capacitors I needed to order. Plus the fact they seemed to be out of 1000 uf @ 16 volts of every brand except Sprague/Vishay (which I did NOT like the price).
Seems like all the capacitor prices went up. In some cases, WAY up.
Oh yes, I almost forgot. All the new electrolytic capacitors are now made WITHOUT lead. That means you can count on them failing much sooner and more often than ever before.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version