Main > Main Forum
what is this spintrak part (screw?)
Pages: (1/1)
saleem:
i got my spintrak today and i bought the flywheel which came attached.the spintop was not,obviously thats because the spintrak needs fitting to the cp.now the flywheel is attached to the spintrak using 2 screws,they are allen key and they are screwins but,not screws.
it looks like i need 2 of these for the spintop.
if you look at the pic you can see the little holes these things screw into.
http://www.ultimarc.com/SpinTrak.htm
what are they called please so i know what i need to get.
:)
thecheat:
You mean a set screw?
McMaster Carr for sure but you ought to be able to get 'em at a local hardware store. Should be able to get it from your spinner supplier.
saleem:
yes,thanks.i did indeed do some googling and found out they are set screws.but,the size?
i also dug up an old post while googling and its on site,so i made post there also i have contacted ultimarc.
:)
bkenobi:
Shouldn't Andy have included these with the spinner kit? The flywheel isn't much good without a way to attach it.
AndyWarne:
Absolutely these should have been included. I thought we had weeded out all the ones without screws but looks like we need to re-check.
If you can drop me an email I will send them.
Pages: (1/1)