| Main > Main Forum |
| what is this spintrak part (screw?) |
| (1/1) |
| saleem:
i got my spintrak today and i bought the flywheel which came attached.the spintop was not,obviously thats because the spintrak needs fitting to the cp.now the flywheel is attached to the spintrak using 2 screws,they are allen key and they are screwins but,not screws. it looks like i need 2 of these for the spintop. if you look at the pic you can see the little holes these things screw into. http://www.ultimarc.com/SpinTrak.htm what are they called please so i know what i need to get. :) |
| thecheat:
You mean a set screw? McMaster Carr for sure but you ought to be able to get 'em at a local hardware store. Should be able to get it from your spinner supplier. |
| saleem:
yes,thanks.i did indeed do some googling and found out they are set screws.but,the size? i also dug up an old post while googling and its on site,so i made post there also i have contacted ultimarc. :) |
| bkenobi:
Shouldn't Andy have included these with the spinner kit? The flywheel isn't much good without a way to attach it. |
| AndyWarne:
Absolutely these should have been included. I thought we had weeded out all the ones without screws but looks like we need to re-check. If you can drop me an email I will send them. |
| Navigation |
| Message Index |