Main > Project Announcements
One More Mountain's Jukebox Clone
csa3d:
--- Quote from: reko19 on July 21, 2009, 08:56:07 pm ---how do you guys post images so they are part of the post instead of the attachment at the end?
--- End quote ---
Upload your image to the 'not a post' thread like you did here. Then, open that image large from that thread in another browser window. Copy the URL of that image. Go back to the thread you want the image to appear in and type:
--- Code: ---[url]www.pathtoyourimage.com[/url]
--- End code ---
-csa
rEd86:
Very nice. We look forward to seeing the differences in construction/features.
--Ed
javeryh:
Wow. Awesome job. Do you have any pictures of the back?
reko19:
Javeryh,
Below are few pics of the back. It took me three tries to get it right, was getting fairly frustrated. Ended up doing the way it is shown on the pics. It is black plexi that rests on the small wooden pieces located around the perimeter, held in place by a regular furniture magnets. Getting the corners just right was tough, upper corner on the right came out less than perfect I just didn't have the strength to redo it for the fourth time. There is a fan mounted up on top behind the metal which could be seen on the pic. Looks pretty good, pictures highlight all imperfections, fingerprints, etc.
reko19:
Speakers:
I was not really happy with the sound of the dell soundbar. I have it at work and, IMHO, sound was not so great. I picked up a pair of these, which sound 10x better:
Two problems, they are too tall and they have opening on top. This is how I handle too tall problem:
After that I sandwiched them bottom to bottom. The speaker with volume, treble, and base controls has additional board at the bottom for phone jack, aux jack, and LED. That board was removed all together. Knobs were pulled off as well. If you look at the bottom of the juke, you'll see that the opening for the speakers is bigger that the ones that used dell soundbar. You'll also see a grommeted opening on the side that are aligned with the openings on top of the speakers.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version