Main > Main Forum
Hidden admin buttons - What size? Regular size! [PIC INSIDE]
<< < (2/2)
TOK:
I use the smallest sized momentary buttons I can find for admin and hidden coin-up buttons. I counter-sunk stuff like this on the side or under panels. For a hidden coin up I actually put them in the coin return.

http://www.radioshack.com/product/index.jsp?productId=2062508

They are maybe 1/3 the size or smaller than a standard arcade button. If you have a Sears hardware near you, they have a lot of this kind of stuff too. You can even mix the buttons so you know the function by feel.


javeryh:
Thanks for the suggestions everyone. I ended up using regular Happ buttons.  I recessed them using my 1-3/8" forstner bit and it came out OK.  Getting the drill lined up was tricky but no one will ever see it. Check out the results.  The pic on the left is from a weird angle (it was late) and the pic on the right shows one hole recessed but not punched through.  I did end up using some leftover blue paint to color the exposed plywood.  It's not the prettiest job but it will work.
Franco B:
Just the job  :cheers:
Navigation
Message Index
Previous page

Go to full version