Main > Main Forum
Help me build my own spinner!
<< < (2/3) > >>
Ginsu Victim:
My hack used an optical mouse. Been working fine for over a year so far.
severdhed:

--- Quote from: Ginsu Victim on July 18, 2009, 12:15:17 am ---
--- Quote from: severdhed on July 17, 2009, 10:27:34 pm ---i'll try to find a link tomorrow to the guide i used, but i made one using parts from an old pc hard drive.  it worked pretty well, but i found that i rarely ever used it, so i didnt bother putting it back in my new panel

--- End quote ---

If you mean the Arcade Stupidity link, unless it has moved somewhere else, that link doesn't work anymore.

--- End quote ---

yeah, that's the one i used.  it was pretty simple.  but it is hard to find a hard drive that will work with that method.  when it was time to build one for my friend, we used a similar method, using the center spindle from the hard drive, with an optical mouse PCB mounted below it
jholman76:
I stumbled apon the perfect drives for spinners at work one day. It has a spindle that spins on the top and on the bottom. Quite hard to find.
(NEVER USE THESE AS STORAGE DRIVES.. THEY ALL FAIL)

The Drive: Model Maxtor 2b020h1
http://www.joeholman.net/arcade/spinner/01.jpg

In the middle of the spindle, there is a shiny spot. If there is a shiny silver sticker on the middle of the spindle, you got a winner. If it is solid metal... sorry.
http://www.joeholman.net/arcade/spinner/02.jpg
http://www.joeholman.net/arcade/spinner/03.jpg

Spindle Removed (notice the nice mountable area with the 3 screw holes)
http://www.joeholman.net/arcade/spinner/04.jpg

Back Side with a Mouse chopper superglued to the back of the spindle
http://www.joeholman.net/arcade/spinner/05.jpg

Mounted to a test half-box (Had to use some spacers from another HDD Spindle to make it taller)
http://www.joeholman.net/arcade/spinner/06.jpg

Not so bad, eh? Going to do a smaller hole next time
http://www.joeholman.net/arcade/spinner/07.jpg

The Counter-sunk screws for the mount
http://www.joeholman.net/arcade/spinner/08.jpg

The guts of the hack. I have some other mice that have much smaller boards, but this works just fine. notice the cables to the left for the mouse buttons. nice to do for future expansion, if you want
http://www.joeholman.net/arcade/spinner/09.jpg

I'm trying to collect these as I can at work, so hopefully if anyone has interest I can send them your way. I'll post info if I get enough.
Bluedeath:
ive done the arcade stupidity hack nd worked fine but i was disappointed by the low resolution of the mouse i used, I'm thinking to build a bigger opticall wheel (wht more teeth) to overcome the problem. 
vidmouse:
I ended up using VCR parts, following this very helpful tutorial by krutknut.


Here's how mine came out (WIP shots)






Navigation
Message Index
Next page
Previous page

Go to full version