| Main > Main Forum |
| Visual Pinball Key Issues...any idea? |
| (1/1) |
| sk8ersublime:
Hello everyone, So I have been rapidly adding programs to my cabinet, I put on Future Pinball the other day, and its great. But a lot of my favorite tables are on Visual Pinball. So i installed Visual Pinball on my cab and got it running, but I am having an issue, I have set my Keys to the following in Visual Pin: Left Paddle = 3 Right Paddle = 4 Coin = 5 Start = 1 tilts are = C, left Crtl, and ] I have also set this up in PinMame by using the Tab menu. But when I press the paddles, they add coins, it wouldnt be that bad, except that most tables make sounds when you add coins and it gets really annoying. I have read that Visual Pinball by default uses 1-5 for paddles, coins and stuff. So my question, how the hell do i change the default values?? Ive tried search but I can find what exactly to do.....and if it helps, im using an X-arcade DIY kit for my panel.... Thanks in advance, Chad |
| mlalena:
I thought both Future Pinball and Visual Pinball used the same controls. Many of these controls are the same keys as in MAME so I wired 2 buttons to the same pin on my IPAC. Coin = 5 = Same as MAME Start = 1 = Same as MAME Left Paddle = Left Shift = P1 button 4 in MAME Left Tilt = Z = P1 button 5 in MAME Right Paddle = Right Shift = P3 button 2 in MAME Right Tilt = / Center Tilt = Space = P1 button 3 in MAME Plunger = Enter = P3 button 3 in MAME Are you implying that it works in Future Pinball, but you had to resort to this odd mapping for Visual Pinball? |
| sk8ersublime:
Future Pinball works fine. All keys only press what they are suppose to. but in Visual Pinball w/ PinMame, when i press '3' or '4' which is what the X-arcade default side buttons are, it is the right/left flipper, and it adds coins. I have changed the Keys in both Visual Pinball, and PinMame, so I am guessing that they are hardcoded in some file and its not changing when I make the changes. |
| Navigation |
| Message Index |