Main > Project Announcements
touch screen wall mount jukebox build
hobsonschoice:
Back and front routed and t-molding test fitted, Painted yellow.
hobsonschoice:
front panel and sides screwed in from the front as i shall be hiding the front with a plexiglass face.Sides painted black.Slots cut and tetsed for cd mount and usb slots.
hobsonschoice:
Cut plexiglass using the front panel as a template and applied a coat of yellow paint on the inside to get a gloss effect.
hobsonschoice:
Ok, in with everything, Powerstrips, usb leads, a 12v adapter to run the fans independently, switch for fans, on/off switch and mobo set to hibernate on button press.
Cd slotted and hotglued, I used a cd adepter board to extend through to a usb hub. You could also just get an external cd drive to do the job.
hobsonschoice:
and another angle so you can see a bit more of whats going on.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version