| Main > Main Forum |
| How easily swappable are Pacman/Defender control panels? |
| (1/3) > >> |
| GaryMcT:
I'm contemplating buying a Pacman machine for vertical Mame and a Defender machine for horizontal Mame. I can get replacement control panels here for both: http://www.arcadeshop.com/cabinets/cabinets.htm Have any of you built multiple control schemes this way and made it easily swappable via a connector? How did it turn out if so? Thanks! |
| daywane:
only thing like that I did was Pac Man , Ms Pac, Super Pac CP swapable |
| Turnarcades:
If making a modular or swappable panel, just using interfaces that have a USB connection should be sufficient as you just unplug the cable from the interface mounted on the panel and plug it into the interface on the swapped panel. |
| CheffoJeffo:
--- Quote from: GaryMcT on June 19, 2009, 10:06:31 pm ---I'm contemplating buying a Pacman machine for vertical Mame and a Defender machine for horizontal Mame. I can get replacement control panels here for both: http://www.arcadeshop.com/cabinets/cabinets.htm --- End quote --- I didn't know that Steve stocks Defender panels (and even after checking don't see any). |
| daywane:
I have the GPWiz wired to a 25 pin femal port. CPs are wired to 25 pin male port. Radio Shack |
| Navigation |
| Message Index |
| Next page |