Main > Main Forum
Happ Trackball Calibration Issue
<< < (2/2)
u_rebelscum:

--- Quote from: rogpics on June 08, 2009, 11:32:46 am ---Just the mouse.  The wheel actually rolls straight up. 

--- End quote ---

"Wheel"?  Are you referring to the encoder disk, or the trackball's ball?

When you roll the ball, does the left/right roller roll also?  (it shouldn't.)  You can watch this with out taking the TB apart; just watch the encoder disk and see if it spins too.  If it does, it's a physical issue.  If it doesn't, then you got wiring or sensor issues (neither that "calibrating" would help much, since the signal is bad).
rogpics:
I mean the trackball's ball rolls correctly.  I'll have to take it apart and check it out. 

Thanks for everyone's advice.  I'll let you know the outcome on Friday.
rogpics:
I tried a different trackball and it worked perfect.  I pulled the other apart and cleaned it and it works perfect now.  Thanks for all of the replies.
Navigation
Message Index
Previous page

Go to full version